Advertisement
LED orientation light 230 V~, white, LED orientation light 230 V~, warm white
￭
Connect flush-mounted insert (1) as shown in the connection example
(see figure 2).
￭
Mount the flush-mounted insert (1) in the appliance box. The terminals must
be at the bottom.
￭
Complete the luminaire (see figure 1).
￭
Switch on mains voltage.
Changing the brightness of the LED orientation light
When delivered, the luminaire (1) is at maximum brightness.
DANGER!
Mortal danger of electric shock.
The following work must be carried out under mains voltage and therefore may only
be carried out by an electrician!
Only use insulated tools for the work! Cover up live parts in the working environment.
￭
Switch off mains voltage.
￭
Remove lamp cover.
￭
Remove flush-mounted insert (1) from the appliance box. When doing this, en-
sure insulation of the cables in accordance with regulations.
￭
Switch on mains voltage.
￭
Switch on luminaire with switch (6).
￭
Adjust brightness by turning the adjuster (7) (see figure 3).
￭
Switch off mains voltage.
￭
Mount the flush-mounted insert (1) in the appliance box. The terminals must
be at the bottom.
￭
Fit lamp cover again.
32576112
10869860
Image 3: Brightness adjuster
10.08.2022
5 / 6
Advertisement
