Page 1
Read this manual before you use this Powerjack. Follow all safety warnings and instructions. If you are uncertain about the operation of the Powerjack, call us directly at 1-800-323-1653 for assistance or contact the closest Powernail Dealer for help. Please retain this information for future reference. REV 19.04.18...
Page 2
2. Ratchet the lever handle until faceplate contacts the stationary surface 3. Continue to ratchet until the fl oor catch draws the fl oor tight for nailing 4. The Powerjack 100 can be left in place, hands free, while that section of fl ooring is being nailed down.
Page 3
Picture 1 The Model 100 pushes against a stud location on a stationary wall to pull the strips into place. Great for snugging-up end strips against walls, wall trim or fi xed cupboards or cabinets (see picture 1). Picture 2 When a stud location cannot be determined, a board long enough to span the distance of the studs should be used...
Page 4
08-500232A 15. RACK ASSEMBLY 08-10000250 16. BASE PLATE 08-50000180 17. HOUSING 08-50000190 18. HOUSING SPACER 08-10000260 19. 1/4-20 x 5/8” F.H.C.S. (x4) REPAIR KIT PART NO. TUNE-UP KIT 08-100-TU-KIT Visit our web page “Where to Buy” at www.powernail.com POWERNAIL ®...
Need help?
Do you have a question about the Powerjack 100 and is the answer not in the manual?
Questions and answers