±1.000 kg/cm 0.001 kg/cm STANDARD ACCESSARIES -B07K ±7.00 kg/cm 0.01 kg/cm Tow(2) 1/8" PT plugs for duplicate/ Snap ring Mounting ring, four(4) mounting screws We can apply to other user specification (Pressure units and range) Copyright 2003.08 ULFA TECHNOLOGY CO.,LTD http://www.ulfatech.com...
"HIGH" port and negative pressure(vacuum) is connect to "LOW" port. (In this case, another port is open to air) 4. Standard pressure connections are barbed fittings Supply Voltage(VDC) for 3/16" I.D. tubing. Copyright 2003.08 ULFA TECHNOLOGY CO.,LTD http://www.ulfatech.com...
P key PEAK Factory setting recovery : The parameters are changed all to factory setting value and all user Press the P(UP) key setting value is cleared. once more to release PEAK offset mode Copyright 2003.08 ULFA TECHNOLOGY CO.,LTD http://www.ulfatech.com...
3 seconds till appear "SAvE" on LED appear "SAvE" on display PEAK display to save and exist to save and exist in the in the setting mode sampling time setting PEAK mode Copyright 2003.08 ULFA TECHNOLOGY CO.,LTD http://www.ulfatech.com...
Page 6
344, industrial zone ,201 haan 3-dong kwang myung-city, kyung ki-do Press ENTER 423-754 KOREA more than 3 seconds till appear "SAvE" on LED TEL:02-806-4403 FAX:02-806-4406 to save and exist in the PEAK ulfatech@ulfatech.com setting mode. Copyright 2003.08 ULFA TECHNOLOGY CO.,LTD http://www.ulfatech.com...