±1.000 kg/cm 0.001 kg/cm STANDARD ACCESSARIES -B07K ±7.00 kg/cm 0.01 kg/cm Tow(2) 1/8" PT plugs for duplicate/ Snap ring Mounting ring, four(4) mounting screws We can apply to other user specification (Pressure units and range) Copyright 2003.08 ULFA TECHNOLOGY CO.,LTD http://www.ulfatech.com...
"HIGH" port and negative pressure(vacuum) is connect to "LOW" port. (In this case, another port is open to air) 4. Standard pressure connections are barbed fittings Supply Voltage(VDC) for 3/16" I.D. tubing. Copyright ⓒ 2003.08 ULFA TECHNOLOGY CO.,LTD http://www.ulfatech.com...
Factory setting recovery : The parameters are changed all to factory setting value and all user Press the △P(UP) key setting value is cleared. once more to release △ P PEAK offset mode Copyright ⓒ 2003.08 ULFA TECHNOLOGY CO.,LTD http://www.ulfatech.com...
△ P appear "SAvE" on LCD appear "SAvE" on display PEAK display to save and exist to save and exist in the △ P in the setting mode sampling time setting PEAK mode Copyright ⓒ 2003.08 ULFA TECHNOLOGY CO.,LTD http://www.ulfatech.com...
Page 6
344, industrial zone ,201 haan 3-dong kwang myung-city, kyung ki-do Press ENTER 423-754 KOREA more than 3 seconds till appear "SAvE" on LCD TEL:02-806-4403 FAX:02-806-4406 △ P to save and exist in the PEAK ulfatech@ulfatech.com setting mode. Copyright ⓒ 2003.08 ULFA TECHNOLOGY CO.,LTD http://www.ulfatech.com...