Page 1
– PATT RGB Vintage Retro Lamp with tungsten 750W Lamp and LED Aura This product manual contains important information about the safe these installation and use of this projector. Please R––– and follow instructio ns carefully and keep this manual in a safe place for future reference.
: LAMP+HSV ................9 HANNEL DEFINITION : ....................9 HANNEL DEFINITION ( ): .................10 HANNEL DEFINITION DEFAULT MENU........................11 1.DMX512 MENU ....................11 2. MANUAL DIMMING MENU ................12 3.DEMO_RUND EMO MODE MENU ..............12 4.AUTO PROGRAM MENU .................13 5.SETTING MENU ....................13 TECHNICAL PARAMETERS ...................14 Summarize Please read this manual thoroughly and carefully, so that you can use it for...
This product complies with the following standards: GB7000.1-2015/IEC60598-1:2014 GB7000.217-2008/IEC60598-2-17:1984+A2:1990 Main performance OLED display with power indication, signal indication. 1peice of 750W Halogen light bulb,32pcs RGB LEDs LED controlled strobe, color wheel, and self-propelled effects. 4/6/9channels for choice. Over-temperature automatic protection. Super halogen brightness can be adjusted.
Make sure the power cord is not curled or scratched by sharp objects. Always check the equipment and power cord. If the external cord of this lighting equipment is damaged, the cord must be replaced by the manufacturer or its service agent or a qualified person to avoid danger.
CONTROL PANEL Button Callout the main menu, or exit the current menu (that is, return to the previous menu and give up options or parameters) Upwards browse menu item or parameter increment DOWN Browse down menu items or decrement parameters ENTER Confirm selections or parameters (ie go to the next menu, or exit...
the current menu and save the selection or parameters) Display OLED display signal indication information in the upper left corner, the function is as follows: 1、No sign——No external control signal access 2、DMX OK——External DMX512 signal access 3、Sla OK——Slave signal access 4、Master——Master mode Common settings Manual control...
DOWN to set the parameters and press ENTER to confirm. Static color The xxx page of the large font address code is displayed on the boot. Press ENTER to enter Main Menu, Press UP or DOWN to find DEMO_RUN, Press ENTER to confirm entry, browse through the menu below Press ENTER to confirm the selected color.
Press UP or DOWN to find Slav Press ENTER to confirm Master setting method: Enter SETTING (Setup menu) Press UP or DOWN to find MasSla Press ENTER to enter Press UP or DOWN to find Mast (master) Press ENTER to confirm Note: Set up the master slave One of the Lighting equipment is set as the master and the other is the slave (DMX mode).
4/6/9 Channel mode selection Enter DMX512 (DMX menu) Press UP or DOWN to find ChMo and enter, Press the UP or DOWN button to select the number of channel modes (4CH/6CH/9CH) and confirm with ENTER. Set the running status when the DMX signal is not received in the DMX mode Enter the DMX512 menu and press ENTER, Then press UP or DOWN to find Sign Press ENTER to enter...
6 channel definition: Channel value function CH1: 000-255 Halogen dimming 0~100% 000-255 Red LED dimming 0~100% 000-255 Green LED dimming 0~100% 000-255 Blue LED dimming 0~100% 000-255 macrospeed 000-255 Macro run effect selection 9 channel definition(default): Channel value function 000-255 dimming 0~100% strobe 000-005...
170-184 no strobe 185-189 strobe 7: Pulse strobe (faster to slower) 190-204 no strobe 205-255 strobe 8: Random Pulse Strobe (faster to slower) no strobe 000-255 Halogen dimming 0~100% 000-255 Red LED dimming 0~100% 000-255 Green LED dimming 0~100% 000-255 Blue LED dimming 0~100% 000-255...
1.DMX512 menu Main menu Item Options remark ADDR value: Defaults:1 Set the address code 1-512 ChMo 4 channel mode Channel mode 6 channel mode 9CH (Default) selection 9 channel mode DMX512 DMX menu STOP Stop running Sign (Default) Operation without HOLD DMX signal Keep the last signal...
5. Setting menu Main Submenu Submenu Submenu menu Reload Reload Data overload Don’t reload MasSla Mast Master mode (Slave presses Master/slave mode setting synchronously with the master. Note that only one master can be set. The master will exit master mode when it reaches DMX mode) Slav...