Marksman 67093c Instruction Manual

Marksman 67093c Instruction Manual

2000w hot air gun

Advertisement

Quick Links

INSTRUCTION MANUAL
67093c
Read all the instruction carefully before you use
the appliance and keep it for future use.
2000w hot air gun
• 230V~50Hz
• 2000w
• 500-650L/min
• 300º/600º c
13 AmP fuse (max)
must be fitted to plug
attached to this cable.

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the 67093c and is the answer not in the manual?

Questions and answers

Subscribe to Our Youtube Channel

Summary of Contents for Marksman 67093c

  • Page 1 INSTRUCTION MANUAL 67093c Read all the instruction carefully before you use the appliance and keep it for future use. 2000w hot air gun • 230V~50Hz • 2000w • 500-650L/min • 300º/600º c 13 AmP fuse (max) must be fitted to plug...
  • Page 2 IMPORTANT SAFEGUARDS Please read these operating instructions before using the tool for the first time and keep them with the tool at all times. Technical Data 67093c Mains Voltage/Frequency 230v~50Hz Power Input 2000w No. of Temperature Settings Maximum Air Temperature 300º/600º...
  • Page 3 SAFETY INSTRUCTIONS When using the machine, always observe the enclosed safety instructions as well as the additional safety instructions. The following symbols are used throughout this manual: Denotes risk of personal injury or damage to the tool. ADDITIONAL SAFETY RULES FOR HOT-AIR GUNS •...
  • Page 4 • For optimum result it is recommended to test the machine first on a small part of the work-piece. Switching on and off (fig. A) • The machine can be switched on to different temperature settings. • To switch the machine on to the low setting, set the on/off switch (1) to I. •...
  • Page 5 17. Use of accessories. For your own safety, use only accessories that are specified in the operating instructions or recommended by the tool manufacturer. Any tool, inserts, accessories other than those recommended in the instructions may cause a potential shock or injury to the user. 18.
  • Page 6 UK plUg rewiring Your appliance operates on 230-240V-50Hz AC Mains and comes fitted with a 3-pin BSI Approved plug, so that it is ready for use by simply plugging into AC Mains. Should you need to change or refit a plug, proceed as follows: IMPORTANT: The wires in the mains lead are coloured in accordance with the following code:...
  • Page 8 To return your used device, please use the return and collection systems or contact the retailer where the product was purchased. They can take this product for environmental safe recycling. 2000w hot air gun 67093c...

Table of Contents