Advertisement
Quick Links
Advertisement
Summary of Contents for Oceanus AQM-09
- Page 1 AQM-09 Air quality monitor system Operating Manual Henan Oceanus...
- Page 2 Attention: 1. All operators who operate and test our company’s factory instrument must read this manual carefully before operation. Only the instrument of this company is operated according to the operation manual of this company, can the instrument work normally. 2.
- Page 3 5 seconds. I. Product introduction: AQM-09 is a new product which can monitor the air quality via the value of O3, SO2, NO2, CO, PM2.5, PM10, etc. The target value is converted into voltage signal by operational amplifier circuit, and then filtered through high-precision AD data acquisition system.
- Page 4 concentration is obtained after amplification, filtering and AD acquisition. The obtained gas concentration and particulate matter concentration can be displayed on LCD screen in real time, and can also be transmitted to cloud platform or environmental protection platform through GPRS, 4G LTE and other network signals, so as to realize the monitoring of regional environmental quality.
- Page 5 Residential quarters, schools, hospitals. Environmental impact assessment and source apportionment. II. Specification information 2.1 Basic parameters Air quality monitor system Name AQM-09 Model Sampling mode Diffusion+Pump suction Data transmit RS485 Modbus，4G LTE optional Pre-heating time Body material Cold rolled steel plate...
- Page 6 Working humidity 0%RH ~99%RH Storage temperature -40℃~70℃ Power supply AC220V/50Hz, Solar panels optional, customized for every country Power Humidity < 90%RH，power < 20W； Humidity > 90%RH，power > 40W， Dimensions 500*400*300mm Protection grade IP55 2.2 Basic parameters of particle monitor system Range PM2.5（0-1000）ug/m3，PM10(0-1000)ug/m3 Sampling flow rate...
- Page 7 2.3 Basic parameters of gas detection Range/ppb Resolution/ppb Precision/%FS 2000 ±5 2000 ±5 2000 ±5 200ppm 10ppm ±3 VOCs 20000 ±5 20ppm 0.1ppm ±5 2.4 Reference standard HJ 654-2013, Technical Requirements and Detection Method of Continuous Automatic Monitoring System for Gaseous Pollutants in Ambient Air (SO2, NO2, CO, O3).
- Page 8 2.5 Product features Modular design, configuration of arbitrary combination, easy to set different monitoring factors on demand, suitable for large-scale grid distribution points; The calibration is carried out on the basis of traceable reference standards. Select four electrode high precision import sensor. ...
- Page 9 IP cameras with various parameters can be selected to ensure night and line-of-sight shooting requirements, automatic capture, and real-time viewing by users. Field real time data display: terminal instrument data update time can be adjusted. Installation modes are various, and can be selected according to the site ...
- Page 10 The system ingeniously designs the light sensitive area as the place where the scattering of particles occurs. When the particles pass through the light sensitive area formed by the focused laser, the light scattered by particles is collected by the Micro-Photoelectric detector on the detection window.
- Page 11 3.3 System From the main interface choose the system , you can check and modify system setting,...
-
Page 12: Installation
From the system setting choose the storage setting ,you can set whether use the U disk, and set the storage time , export , delete or check data. .3.4 Dust calibration From the main interface choose the user , you can calibrate the dust value, the password is 123456 IV. - Page 13 of the state. 3. Install and use the monitor in the indoor safety area without explosive gas environment. 4. Correct installation and reliable grounding to improve anti RFI interference and anti EMI interference capability. 5. Ensure that the test gas concentration does not exceed the gas range of the monitor.
- Page 14 V. Common fault maintenance & After-sale service Information 5.1 Common fault maintenance Fault Possible cause Solve Unconnected power Check whether the power Can’t start to work supply line is inserted Check whether the SIM Can’t connect the The SIM card insert insert in right;...
- Page 15 The customer who purchases the instrument of our company enjoys 12 months warranty period. In the process of using, the user should abide by the application instructions, if the damages which is caused by the improper using, or the harsh working environment in the warranty period, the company would not be responsible for it.
- Page 16 Henan Oceanus Import & Export Co., Ltd. Email: info@china-oceanus.com Web: http://china-oceanus.com/...
Need help?
Do you have a question about the AQM-09 and is the answer not in the manual?
Questions and answers
Can this instrument be used for indoor air and noise measurements