RJS MD2 Owner's Manual
  1. Manuals
  2. Brands
  3. RJS Manuals
  4. Speaker System
  5. MD2
  6. Owner's manual

RJS MD2 Owner's Manual

Bass augmentation speaker system
Hide thumbs
1
2
3
4
5
6
7
8

Advertisement

Table of Contents

MD2 Owner's Manual
And Setup Instructions
Thank you for your purchase of the
MD2 - Bass Augmentation Speaker System.
Understanding and implementing this information and these setup details
will ensure that you get to hear and enjoy what this system has to offer.
So, let's get started.....

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the MD2 and is the answer not in the manual?

Questions and answers

Subscribe to Our Youtube Channel

Summary of Contents for RJS MD2

  • Page 1 And Setup Instructions Thank you for your purchase of the MD2 - Bass Augmentation Speaker System. Understanding and implementing this information and these setup details will ensure that you get to hear and enjoy what this system has to offer.
  • Page 2 In fact, you can use the MD2 as a pair of stands for your satellite speakers. When used with floor standing systems we recommend placing the MD2 next to the enclosures.
  • Page 3 This wire goes where??? The MD2 is a passive device. Just like most speakers. However, the MD2 is specialized to focus on low frequency audio reproduction. If you have bass management abilities in your pre-amp / processor you can drive the MD2 with any capable power amplifier.
  • Page 4 This is a mono amplifier. 2 sets of outputs are convenient for connecting a pair of speakers, such as the MD2’s. Two MD2’s connected in this way presents an ideal 4Ω load to the SA1000.
  • Page 5 MD2 battling each other for dominance. Your speakers will handle the upper bass (If they can) and beyond while the MD2 will handle the heavy lifting. This section will guide you to achieve this goal.
  • Page 6 ON means…ON. The front panel power switch is the master power switch. The BASS BOOST switch introduces a 3dB boost at 25Hz. The MD2 doesn’t need any stinkin’ boost. In fact, we don’t recommend any boost at all, especially in the lowest frequencies.
  • Page 7 LEVEL up to +6. This will exaggerate sound at the crossover point. This is where both your speakers and the MD2 are overlapping. This is where the PHASE becomes important. By adjusting the PHASE from 0° to 180° you should be able to hear which setting has the strongest output.
  • Page 8 Warranty We warranty the MD2 to be free of defects for a period of 5 years. This warranty is transferable. We are warranting the item, not the owner. This pair of MD2’s in ************ have been registered into our database. Serial Numbers ************ and ************ Warranty will expire in ******** 20**.

Table of Contents