Page 1
User Manual Noise Cancelling Over-ear Wireless Headphones Design by Ross Lovegrove...
Page 2
Introduction Thank you for purchasing KEF Mu7. Mu7 combines excellence in three fields – audio quality, user experience and aesthetics. Mu7 gives you the opportunity to bring the listening room everywhere you go. Please read this user manual fully before using Mu7.
Headphones Overview RIGHT Touch sensing control USB-C charging port Bluetooth Smart ANC LED Indicator ANC on ANC off 3.5mm port Power on / Power off...
Get Started Wear the Mu7 headphones 1. Extend and adjust the Mu7 headband to properly fit your head. 2. Put on the Mu7 with the earpads fitting snugly over your ears.
Page 6
First time to pair Mu7 headphones with your Bluetooth device 1. Long press “Power” button to turn on Mu7, and the LED will turn solid white briefly. 2. In one second, Mu7 will directly enter Bluetooth pairing mode and the LED will start blinking blue.
Page 7
2. Go to the Bluetooth setting page of device 2 and select “KEF Mu7” from the device list for pairing. 3. Once Mu7 is connected to device 2, you may reconnect the Mu7 to your device 1 on its Bluetooth setting page.
Page 8
Select ANC mode 1. By default setting, ANC mode is “ANC ON”. 2. Press “ANC” button to switch to ‘Smart ANC” or “ANC OFF” mode. 3. If Mu7 is powered off, the currect ANC mode is saved. ANC mode sequence: ANC on...
Page 9
Charge the Mu7 headphones* 1. Use the supplied USB Type-A to Type-C cable for Mu7 charging. 2. Plug the USB-C plug into the Mu7 charging slot. 3. Plug the USB-A plug into a USB AC adaptor or computer USB port for charging.
Page 10
Disable touch sensing control 1. Long press “ANC” buttons to disable the Mu7 touch sensing control function. 2. Voice prompt “Touch disabled” can be heard. 3. All controls using touch sensing for music, call or voice control will be disabled.
Page 11
• To enable ANC function, power on the Mu7 for ANC mode selection. • Once the Mu7 is powered on with 3.5mm audio cord connection, power off function will be disabled. Mu7 will turn off automatically if you unplug the 3.5mm audio cord.
Page 12
Headphones Controls RIGHT Touch sensing control USB-C charging port Bluetooth Smart ANC LED Indicator ANC on ANC off 3.5mm port Power on / Power off Button / Port Function Touch sensing control Music, call and voice controls USB-C charging port Battery charge and Servicing ANC* ANC mode change...
Page 13
Music and Voice Controls RIGHT Music Control Touch sensing control Function (Right earpad) Play / Pause Tap once Volume up Swipe up / Swipe up and hold Volume down Swipe down / Swipe down and hold Previous track Swipe backward Next track Swipe forward Voice Control...
Call Control RIGHT Call Control Touch sensing control Function (Right earpad) Accept / End call Tap once Volume up Swipe up / Swipe up and hold Volume down Swipe down / Swipe down and hold Reject call Swipe backward / Swipe forward Mute / Unmute Tap and hold the mic...
LED Indicator Light RIGHT LED light colour Function / Indicator (Right earpad) Solid white Power on Blinking blue Bluetooth pairing Solid white Bluetooth connected Blinking white Low battery / battery charging LED off Battery fully charged...
Voice Prompt Function Voice prompt Power on “Power on” Power off “Power off” Bluetooth Pairing “Ready to pair” Bluetooth Connected “Connected” Bluetooth Disconnected “Disconnected” Bluetooth Connect to Device 1 “Device one connected” Bluetooth Connect to Device 2 “Device two connected” Bluetooth Disconnect with Device 1 “Device one disconnected”...
Dimension (H x W x D) 199 x 153 x 89mm Weight 309g Operating temperature -10ºC to 45ºC Power input DC 5V 900mA KEF reserves the right, in line with continuing research and development, to amend or change specifications. E&OE.
Need help?
Do you have a question about the Mu7 and is the answer not in the manual?
Questions and answers