Related Manuals for SVS SVSMDVR
Summary of Contents for SVS SVSMDVR
- Page 1 Safety Through Vision SVSMDVR Mobile Digital Video Recorder Owners Installation and Operating Manual SVSMDVR8H - January 2016...
-
Page 2: Table Of Contents
Table of Contents 1. OVERVIEW ..................... 1 2. HARWARE OVERVIEW ................5 2.1 F ....................5 RONT PANEL 2.2 B ....................6 ACK PANEL 2.3 M ..............7 ONITOR ISPLAY LLUSTRATION 2.3.1 Monitor Mode ..................... 7 2.3.2 Playback mode ....................8 2.3.3 Settings Mode .................... - Page 3 4.6.6.2 LIVE AUDIO .......................... 26 4.6.6.3 VOICE ALARM ........................26 4.6.7 BOOT DELAY TIME ..................27 4.6.8 Peripheral ......................27 4.6.8.1 PTZ ............................28 4.6.8.2 G sensor ..........................29 4.6.8.3 TPMS ( Optional ) ........................ 31 4.6.8.4 Car speed ..........................35 4.6.8.5 GPS ............................
-
Page 4: Overview
1. Overview WARNING, CAUTION & COPYRIGHT WARNING Reduce the risk of fire or electric shock. And do not expose this product to rain. Do not insert any metallic object through the ventilation grills. CAUTION 1. The lightning flash with arrowhead symbol, The exclamation point within an equilateral within an equilateral triangle, is intended to rhombus is intended to alert the user on the... - Page 5 1) The apparatus should not be exposed to dripping or splashing water and that no objects filled with Liquids, such as vases, should be placed on the apparatus. 2) CAUTION - Danger of explosion if battery is incorrectly replaced. Replace only with the same or equivalent type. 3) The apparatus with CLASS I construction shall be connected to a MAINS socket outlet with a protective earth connection.
- Page 6 Audio Audio in RCA × 2 Audio out RCA × 1 Record Compression H.264 Recording 4CH D1，8CH Half D1 4CH D1，8CH Half D1 Total 240 frame per second Total 240 frame per second Ex : Ex : 2CH 720p@15fps + 6CH 2CH 720p@15fps + 6CH Recording Rate 960H@20fps...
- Page 7 SD Card USB Drive Network 3G/LTE Real-time Remote viewer Vehicle Information Integration Alarm in IO 8 In (N.O) Relay out IO 2 Out (TTL) Car Speed G-Sensor(3 Axis sensor) Tire pressure Buzzer System RS-485 Password Two levels, one for system and the other for HDD format Multi Language Upgrade USB Host...
-
Page 8: Harware Overview
2. Harware Overview 2.1 Front panel Front panel Interface Item Name Explanations HDD Cover Lock Lock the hard disk cover. HDD LED LED flashes when data is being stored. REC= Light on permanently, Stop= Light off, REC LED SD card recording: Light flashes. POWER LED After MDVR boot up, Light always On. -
Page 9: Back Panel
2.2 Back panel Back panel Interface Item Name Explanations The DVR could receive IR signal to operate by remote IR Extension port controller. GPS Antenna GPS aerial port for receiving GPS data. Support 8 Video/2 Audio Input and 1 Video/1 Audio output Multiple Interface connection port. -
Page 10: Monitor Display Illustration
2.3 Monitor Display Illustration This Chapter explains the monitor’s display illustration. Please refer to the diagrams below: 2.3.1 Monitor Mode MONITOR Screen Display illustration Item Name Explanation Date/Time Current system Date/Time HDD has been record rate. Recording and target display backcolor; Recording by SD card that Backcolor will be flash. -
Page 11: Playback Mode
MONITOR Screen Display illustration Item Name Explanation Currently USB drive status. USB Drive Status Blue means drive detected，Gray means drive none detected.，Green means drive include upgrade firmware. Alarm linkagerelay out status. Rela y Out Gray means none relay out triggered，Green means relay out triggered. -
Page 12: Settings Mode
PLAYBACK Screen Display illustration Item Name Explanation System Date System Date by File was recording date. System time System time by File was recording time. Canera No. Camera’s video number on system. Car ID Car Identity name. Currently playback status. Palyback Icon System support X1、X2、X4、X8、X16、X32、X64、X128 forward and X2、X4、X8、X16、X32、X64、X128 backward . -
Page 13: Basic Operation Installation
Setting Screen Display Illustration Item Name Explanation Select Quick search、Event search、Time search mode for data PLAYBACK selection、playback. or Backup selection function. Setup on/off information with system status on monitor . DISPLAY as like “system time” 、car speed 、HDD status….etc Adjust the image display for each video channel. CAMERA (ex: Brightness、Contrast、Hue、Shade ) ALARM... - Page 14 The Menu button also functions as the ESC function. By pressing the “MENU” button in the sub-mode, the display on the monitor will return to the previous page and save all modification. ENTER Button： The enter button acts as the confirmation button. In the main menu page, after selecting the required settings category, press the enter button to bring the display page to the settings sub category page.
- Page 15 9-Split ○ ○ ○ ○ ○ ○ ○ ○ Channel Button： Press the Channel number button to select the display view of each individual camera.
-
Page 16: Installation
Please refer to the diagram to connect the various external equipments and following. F or Cam er a # For SVSMDVR, o peration of the Power output is voltage bypass. # The various external equipments shown in the diagram are just for reference. -
Page 17: Hdd
3.1.1 HDD Please install a 2.5" SATA or SSD drive on the detachable hard disk tray which is provided with the DVR. The hard disk installation steps are as follows： 1. Pull the HDD cover out and put into a HDD.。 2. -
Page 18: Function Settings
4. Function Settings PLAYBACK The “PLAYBACK” menu has 4 kinds of sub-modes for user's to choose ( quick search、event search、time search and backup ). If user wants to skip viewing the playback video just press the MENU button. That will make the system go back to the previous page where the user has made the selection. -
Page 19: Time Search
Event Search Playback Code Name Illustration Item Code Name Explanation Power On Power Off HDD Format Unusual Tire pressure detected Driving overspeed G Sensor，n=Direction(x,y,z) Video Loss，n=Channel Alarm is triggered，n=Alarm In Relay Acutation，n=Channel System’s Time Adjusted Video resolution adjustment 4.1.3 TIME SEARCH The Function for the Time search is different from that of the Quick search. -
Page 20: Backup
displayed. Use the Left and Right direction button to flip pages or use the up and down direction button to select the system recorded video files in the list. After selection, press enter to start the playback function. 4.1.4 BACKUP Plug in USB drive to MDVR and mak sure icon change color to blue that mean system already detected and connected. -
Page 21: Display
When the Back up has finished, the system will show a message box that reminds users to plug out the USB drive from MDVR. DISPLAY Screen Display illustration Item Name Explaination Choose the display mode of the instant video on starting the DVR machine, includes Auto (automatically detects the number of Start Video camers connected to the DVR and selects the appropriate display... -
Page 22: Alarm
Press the left and right direction button to select the channel which needs to be adjusted. Press Enter to adjust video with selected channel. ALARM The main function for the alarm setting is used on MDVR combining external detection equipment. At back panel “... -
Page 23: Record
ALARM SETTINGS illustration Item Name Explaination At Alarm trigger, system provide Action settings, ACTION POPUP、BEEP、OUT1、OUT2… etc. The optioned object The dwelling time for each alarm ring can be set as from 5 ~ 60 DWELL TIME seconds or keep when always active . TRIGGER SIGNAL Setup external alarm voltage Level to HIGH active or LOW active. -
Page 24: Video Settings
RECORD SETTINGS Item Name Explaination The system provides Multiple types of resolution to select. ( CIF、 ENCODE SETTINGS Half -D1、 D1、960H、720P ). Setting ON / OFF feature with record audio from external audio AUDIO input device ( microphone ). Setting ON / OFF feature with record data from GPS. Setting ON / OFF feature with record data from CAR SPEED. -
Page 25: System
new resolution. But if your settings overload with storage capacities, system will show warning screen and reject it.。 Note ! System CH1、CH2 were support Signal with AHD 720P camera, But VIDEO SETTINGS select non-720P resolution, such as 960H or CIF…etc then recorded video is still 960H…. Please note settings with resolution when installing and setting. -
Page 26: Language
4.6.1 LANGUAGE Currently, the system supports seven kinds of language option: Traditional Chinese、English、 Russian、Simplified Chinese、Japanese、French、Spanish. 4.6.2 FORMAT In the Hard Disk “FORMAT” setting mode, there are HDD format and Password setting options. When you select the Format setting, the screen will display an alarm message “Hard Disk Format?” select “Yes”... -
Page 27: Password
Enable the password function, the system will request 1~6 characters (combine operation of either uppercase letter or number). If the password is verified and passed, then the user does not want to format the hard drive. please select “No” and the system will exit and move back to the previous settings page. ... -
Page 28: Date And Time
4.6.4 DATE AND TIME The Date and Time setting function is to set up system’s date and time after the MDVR boot up. The feature relates proper of recorded data so when system switch on, please confirm it again. System is providing adjust time by manual setting、GPS or Time zone. 4.6.5 CAR ID System can display CAR ID on main screen that usually edit according to license plate. -
Page 29: System Audio Config
4.6.6 SYSTEM AUDIO CONFIG 4.6.6.1 BUZZER The DVR has a built-in buzzer. When the MDVR is switched on、the alarm is triggered、video loss or pressing button that the buzzer would beep sound. The user can select to switch this function. 4.6.6.2 LIVE AUDIO System support 2 way audio input that connect micrphone or others then implement real time voice output via Audio out directly. -
Page 30: Boot Delay Time
4.6.7 BOOT DELAY TIME The main function for the boot delay time is to protect the DVR’s components. When Vehicle boot up, that would cause a voltage surge then make machine damage. After engine switch on until to steady state and then MDVR boot could avoid damage of voltage surge. -
Page 31: Ptz
4.6.8.1 PTZ The MDVR passes through RS-485 to connect to the PTZ camera. Currently it supports PELCO-P / PELCO-D protocol setting, and can set the transmission signal per second transfer rate. Swapping video channel with camera to full screen,then press PTZ putton on remote controller. At this moment system would show PTZ camera icon on the left of video number. -
Page 32: G Sensor
4.6.8.2 G sensor The G-Sensor function is used to detect the vibrations generated in the moving vehicle. After the MDVR receives the sensor data along with the images, they are stored in the HDD. When the HDD is connected to a computer, the G-Sensor graphical image data is displayed in accordance to the stored information using the software included in the package. - Page 33 confirmation. Threshold： When system recive data of overload from G sensor that will record event automatically. G sensor status： Gsensor would display Axial X、Y、Z status at once on screen. G sensor type： The system provides 4 selections for the various installed positions; please locate the photo below which best represents the actual installed position of the DVR.
-
Page 34: Tpms ( Optional )
4.6.8.3 TPMS ( Optional ) Install TPMS is helpful to detect tire pressure and system can set warning value with tire pressure. When system recive signal with abnormal tire pressure that send audio message to driver. TPMS cable include ( 5V / TXL / RXL / GND ) that revicer be able to connect 10 tire sencor then install diagram as following：... - Page 35 Install receiver’s Long and short antenna Another side of antenna that SMA connector to connect type of adaptors. Connect antenna signal module.
- Page 36 Tire pressue recive module with DVR sheet define as following : Enter TPMS Settings page and make sure connect state. After check TPMS be connected,Entry launcher setting page and select module of wheel numbers.
- Page 37 Mode 01 ( 4 Wheels ) Mode 02 ( 6 Wheels ) Mode 03 ( 8 Wheels ) Mode 04 ( 10 Wheels ) Single Wheel and touble Wheel of event alarm : Low pressure Alarm HIGH pressure Alarm Over temperature Alarm Launchers of reset to settings :...
-
Page 38: Car Speed
Alarm Windows Icon explain : Normal No signal Pressure over HIGH Did not recive data Pressure over Low Low battery Temperature over High 4.6.8.4 Car speed This function is to detect the Car’s speed. The accelerator speed cable can be connected to a Hertz device and it can instantly syncronise the records of the car’s speed in the DVR. -
Page 39: Gps
Speed Limit Set the maximum speed limit, when overspeed the system will send voice messages notifying the driver. 4.6.8.5 GPS The GPS function is used to log vehicle location also support time adjustment by that. The MDVR has support “GPS” and “GLONASS”system then display real-time GPS information on monitor. - Page 40 * PASSWORD： * SERVER ADDRESS： There is used to access server with safety certification, before User must get Server of IP address or domain name. When MDVR boot up and connect server then server must have the same account to login server successfully.
-
Page 41: Reset To Default
When Ethernet had connected ,System would display linking information on under status bar that incloud link type、signal status、Server connect status and IP address..etc. Network Have got IP address status Link status with Link mode Server 4.6.9 Reset to default The DVR can be restored to factory default setting using this function. -
Page 42: Firmware Upgrade
5. Firmware Upgrade 1.MDVR upgrade firmware there will be the following files: MDVR upgrade the firmware is need some components that contains the following items : (1) u8x-1.10-2011-09-21.tar.gz (2) uxxxxx-1.10-2011-09-21.tar.gz (3) V1.1.8 Copy and paste firmware files to the root directory of a removable USB drive. 2.Take the removable USB drive which has the three files and connect to the USB port of the MDVR. - Page 43 5.1 Firmware version and system Query : On Real-time monitor mode, press upper button of Remote controller to call System info page. The System information page would shows Firmware version、 The capacity of a hard disk drive 、 Ethernet MAC and information with IP.
-
Page 44: Guard Vms For Pc Introduction
6. GUARD VMS for PC introduction 6.1 Overview MDVR had additional a slim Media player that could play video data with HDD、SD card or USB drive. The firmware operator UI support information systems Integration on one screen and time、event video playback、backup, even to draw with Google mapping. Mobile DVR media viewer Illustration Item Code Name... - Page 45 6.1.1 How to get application System had provided two ways to get application: (1) The first way is to save application from HDD, as shown below. Step1. Suspend recording of the program and shutdown MDVR. Step2.Take off HDD from MDVR and connect PC-end via USB-SATA cable. Step3.
-
Page 46: Install
6.2 Install For default settings, HDD and SD card had saved application of media player ( GuardVMS-Viewer ). To execute unzip and select path with program saved then open application. Note : For Windows 7 above , Please click right to select “ Run as administrator ” in order to make sure video and data can be play on PC operator system. -
Page 47: Open File
6.3.1 Open File This function is to search and play .dvr file. Click Open File icon then select backup data (.dvr) to play video. 6.3.2 Search HDD HDD box on MDVR that can connect PC to read backup data via USB interface. Note : Before user take off HDD from DVR, system must be shut down and then remove HDD. -
Page 48: Search Sd Card
2. Use the SATA cable to let the HDD link to your PC. ( the SATA cable is optional ) The format of MDVR recording file is .dvr, when the HDD connect to PC, ".avi" files only supported for the AP. If you want to back up the file and watched by another player. -
Page 49: Windows Layout
6.3.4 Windows Layout The function has support hide window of Map and Vehicle information. 6.3.5 Settings * The Settings function is swap language 、setting each file directory path. -
Page 50: Converter Files
6.3.6 Converter files * Click ".avi" icon on below function bar in order to converter video file 6.3.7 Capture screen * Click camera icon on below function bar in order to capture main screen。... -
Page 51: Find And Play
6.3.8 Find and Play The function has helpful user to execute playback by time search、Event search、Quick search. (1) Step1: Open file or execute search HDD 、search SD. (2 ) Step2: Select Control /Find and play. (3) Step 3: Select Control /Find and play. - Page 52 (4) Step 4: Select Event Index and Click list with selected item.
-
Page 53: View On The Smart Phone By Guardvms
7. View On The Smart Phone By GuardVMS 7.1 Android System 7.1.1 Search and Download in Play Store Type “guardvms” in play store to search, and install it. 7.1.2 Setup GuardVMS Type your sever IP address, and then input the user name and password. ( user name and password need to be set before ) -
Page 54: Guardvms Functions
7.1.3 GuardVMS Functions (1) Remote Live View You will in this page after log in successfully, here you can see the online car(green) and offline car(gray), and the location on Google map The screen displayed as above after login successfully. If the vehicle were online then the car id are marked in green that the location shown on a google map. - Page 55 And now you can see the live play video after all the settings. (2) Record Play Click “Record Play”, set start time and end time, and click “Download” to see the record play. (3 )Local Setting Here is “Local” setting page, you can sort by car ID or date, open/delete file, or into the “Event Center”...
- Page 56 (4) Event Center Setting Here is “Event Center” setting page, you can find the event by date or car ID or event type, and also can delete event record here. (5) Config Setting Here is “Config” setting page, you can set the sever IP, user and password.And set the event notification by each event.
-
Page 57: Appendix
8.APPENDIX 8.1 Remote controller introduction Symbol Illustration MENU/ESC Menu/Esc ↑ ↓ Down ← Left → Right ENTER Enter SEQ/PIP ZOOM IN PTZ Zoom in PTZ Control ZOOM OUT PTZZoom out CH1 Full CH2 Full CH3 Full CH4 Full CH5 Full CH6 Full CH7 Full CH8 Full... -
Page 58: Accessory Description
8.2 Accessory Description Power Supply Cable Video/Audio Cable This cable used to connect power supply from This cable used to connect cameras (video in), the car. (Refer to 3.1 & 3.1.4) monitor(video out) and audio in/out.(refer to 3.1) 12VDC Supply Cable Control Cable This cable used to supply 12VDC from the this cable used to connect the TPMS, car... - Page 59 3G Antenna Power Key Used to connect the 3G antenna port to This key used to turn on/off the MDVR power. strengthen the 3G signal. (Refer to 3.1) Special Key & HDD Screws SATA Cable The special key used to lock on/off the HDD This cable used to let the HDD link to your (Refer to 3.1.2), and the screws used to lock PC.