San Jamar VENUE CSD100 Quick Start Manual

VENUE
Thank you for choosing the Venue Coffee Sleeve Dispenser CSD100 from San Jamar. We appreciate your business
and are confident this high-capacity dispenser will help improve the image and efficiency of your operation. Enjoy!
COUNTER MOUNT & LOADING DISPENSER
1.
Use a screw driver and the
included screws to install the
suction cup feet.
4.
Pull back and hold the push
plate in place.
COFFEE SLEEVE DISPENSER
®
2.
Mount the dispenser - use the
suction cup feet to secure the
unit to the countertop.
5.
Insert sleeves - load the
sleeves until at full capacity.
3a.
Open cover - gently lift out and up on the side tabs to release the
cover. Open cover to rest completely open.
6.
Close cover - return the cover
to the starting position. Press
down on the cover until the
side tabs lock in place.
3b.