Advertisement
All manuals and user guides at all-guides.com
After the air compressor has been run, the engine produces heat. The temperatures of the muffler
and nearby area can reach or exceed 160°F.Severe burns will occur on contact with skin.
Do not modify the air compressor in any way. The air compressor supplies the rated pressure and
rated airflow at its governed speed.
AIR TANK SAFETY
Do not attempt to adjust the safety valve. Also, never attempt to repair or modify a tank. The
fabrication involved in modifications of the tank will weaken the tank. Always replace worn,
cracked, or damaged tanks.
Operate the air compressor on level surfaces only. Inclined surfaces reduce the effective lubrication
of the engine.
Do not expose the air compressor to excessive moisture, dust, dirt, or corrosive vapors.
CHAPTER
CHAPTER 4.PREPARATION
CHAPTER
CHAPTER
4.PREPARATION
4.PREPARATION
4.PREPARATION BEFORE
Before starting the air compressor, verify the following conditions.
AIR
AIR
COMPRESSOR
COMPRESSOR
AIR
AIR COMPRESSOR
COMPRESSOR OIL
● Verify that air compressor head is filled with 10W-30 viscosity oil. Running the air
compressor without oil will cause severe damage to the air compressor head
ENGINE
ENGINE
OIL
OIL
ENGINE
ENGINE OIL
OIL
● Fill the engine with SAE 10W-30 engine oil for general use or follow the table below.
BEFORE
BEFORE OPERATION
BEFORE
OIL
OIL
OIL
- 5 -
OPERATION
OPERATION
OPERATION
Advertisement
