BASE CABINET: ASSEMBLY INSTRUCTIONS Install the Casters Models GCB-2SF-BB WARNING GCB-2SF-BR GCB-3DR-BB Excessive Weight Hazard GCB-3DR-BR Use two or more people to move, assemble or install cabinet. Failure to do so can result in back or other injury. Tools and Parts Gather the required tools and parts before starting installation.
Page 3
Install the Door Handles 1. Open the doors. 2. Insert Phillips head screws through pre-drilled holes in door. 3. Align door handles with screws and tighten. (Do not overtighten) 4. Repeat this procedure for the other door handle. Removing/Installing the Drawers (select models only) Removing the Drawer 1.
TALL STORAGE CABINET: ASSEMBLY INSTRUCTIONS Install the Casters Models GCTL-4SF-BB WARNING GCTL-4SF-BR Excessive Weight Hazard Use two or more people to move, assemble or install cabinet. Failure to do so can result in back or other injury. Tools and Parts Gather the required tools and parts before starting installation.
WALL CABINET: ASSEMBLY INSTRUCTIONS WARNING Models Excessive Weight Hazard GCW-2SF-BB Use two or more people to move, assemble or install GCW-2SF-BR cabinet. Failure to do so can result in back or other injury. Wall Mounting Tools and Parts The hardware used to secure the cabinet may vary depending on the Gather the required tools and parts before starting installation.
FLOOR LOCKING CABINET: ASSEMBLY INSTRUCTIONS WARNING Models Excessive Weight Hazard GCL-2SF-BB Use two or more people to move, assemble or install GCL-2SF-BR cabinet. Failure to do so can result in back or other injury. NOTE: This cabinet must be mounted and secured to wall studs Tools and Parts in the top pre-drilled holes in the back of the cabinet so that it is anchored to the wall studs in two locations.
If Stack-On is properly notified during the one-year warranty period and, after inspection confirms there is a defect, Stack-On will, at its sole option, provide repair parts or exchange the product at no charge, or refund the purchase price of the product.
Need help?
Do you have a question about the GCB-2SF-BB and is the answer not in the manual?
Questions and answers