Advertisement
ELECTRIC ARC WELDING OR GOUGING
Welding Processes
Coated
Electrodes
M.I.G.
On Heavy Metals
T.I.G.
On Light Alloy
T.I.G.
On Metals
M.A.G.
Gouging
By ARC/AIR
4. OPERATING INSTRUCTIONS
4.1.
Setting Sensitivity Selector.
Helmet sensitivity can be adjusted to ambient light conditions. This is necessary for low amperage tasks such as TIG on stainless steel.
4.1.1.
Switch unit on by pressing the ON button.
4.1.2.
Turn the helmet straight in front of the work place adjust the sensitivity selector to the MIN position and then progressively to the MAX position until the filter
switches from light to dark state.
4.1.3.
Turn the sensitivity selector progressively to the MIN position until the filter switches back to the light state. Now welding can commence. If however,
the filter remains dark after the weld is completed, turn again slowly until the filter returns to the light state. The unit is now set for optimum use for the
specific welding application.
4.2.
Setting Delay Selector.
Adjustment can be made to the time it takes for the unit to switch back to the light state after welding has been completed. Turn the selector to the required
setting (MIN 0.1 second to MAX 1.0 second).
4.3.
Setting Shade Selector.
To adjust the shade level turn the selector to the scale number (9-12) corresponding to the type of welding process.
4.4.
Setting and Adorning the Helmet.
4.4.1.
Press the ON switch (4.1.1).
4.4.2.
Set the shade selector to the required setting (4.3).
4.4.3.
Adjust the sensitivity selector (4.1).
4.4.4.
If required set the delay selector (4.2).
4.4.5.
Place helmet on your head and adjust the headband accordingly to ensure a firm but comfortable fit.
4.4.6.
During welding the lens will automatically darken to pre-set shade. On removal of the arc then lens will return to the light state.
4.4.7.
When work is complete, switch helmet off by pressing OFF switch (if helmet is left on it will automatically switch off after 28 minutes).
4.5.
Battery Low Warning.
The welding filter has a red low warning indicator LOW BATT. When the red light warning indicator starts blinking there are approximately 8 hours
of operational use left before the unit fails. Replace the batteries as soon as possible.
5. MAINTENANCE
5.1.
Battery Replacement.
5.1.1.
Open the battery compartment by gently pushing back the shutter latch.
5.1.2.
Install the batteries according to the diagram located inside the battery compartment.
5.1.3.
Close the shutter by pushing it down gently.
5.2.
General.
5.2.1.
Periodically inspect the filter unit and cover/backing lenses. Cracked, pitted or scratched lenses reduce vision and serious reduce level of protection.
Damaged components must be replaced immediately to avoid risk of injury to eyes and face.
5.2.2.
Clean all lenses with a soft tissue and a suitable lens cleaning fluid. DO NOT use any solvents or abrasives.
5.2.3.
DO NOT use any tool or sharp objects to remove components form the filter or helmet. To do so may damage the module resulting in malfunction
and possible personal injury, and will also invalidate your warranty.
6. PARTS LIST
1.
Helmet
2.
Outside cover lens
3.
Frame
4.
Retaining Spring
5.
3.5” x 4.3” Cover lens
6.
Autodarkening welding filter
7.
Inside cover lens
8.
Headband
Declaration of Conformity
with the following EEC standards and directives. The construction file for this product is held by the Manufacturer
and may be inspected on request by contacting Jack Sealey Ltd
Signed by John Sealey
NOTE:
It is our policy to continually improve products and as such we reserve the right to alter data, specifications and component parts without prior notice.
IMPORTANT:
No responsibility is accepted for incorrect use of this product. WARRANTY:
will be required for any claim. INFORMATION: Please call us for a copy of our latest catalogue.
Current Intensity in Ampreres
10 15 20 30 40 60 80 100 125 150 175 200 225 250 275 300
8
9
10
8
9
10
11
9
We, the sole importer into the UK, declare that the product listed below is in conformity
Date 1st June 1998
Sealey Group,
Bury St. Edmunds,
Suffolk.
11
12
10
11
12
11
12
12
10
11
12
10
11
For Jack Sealey Ltd. Sole importer into
the UK of Sealey Power Products
Guarantee is 12 months from purchase date. Proof of purchase
01284 757500
12
Mode Shades for Electronic Welding
Headshield. Model: MIG/LITE
BS679: 1989 EN169
01284 703534
E-mail: sales@sealey.co.uk
MIG/LITE - 213 -170398
Advertisement
