Turning Technologies Pulse Quick Start Manual

Pulse
PULSE KEYS
You will use your Pulse clicker as you do your other handheld devices that have keypads. Key
touches are described here as presses. Several keys have two types of key presses - press and
press and hold.
THE SCREEN
Channel # - Displays Channel # or homework
bin, depending on mode.
Enter/Send - Animated during transmission.
OK when transmission acknowledged.
Correct/Incorrect - Indicates correct or
incorrect answer. Teacher must activate this
option.
RF Activity Indicators - Up arrow flashes for
each transmit, down arrow flashes for each
receive.
Text Entry Mode - Indicates which of the
text entry modes - alpha, numeric, SMS - is
currently in use.
Self-Paced Mode - Indicates that the keypad is
operating in Self-Paced Mode.
Battery Status - Indicates the current battery
voltage from full to low to very low. Very low
will flash.
Switch text entry mode
Press key multiple times to cycle
through the text entry modes.
As you change modes, they are
pictured on the Screen.
Power
Press to power on your Pulse.
Press and hold for 2 seconds to
power down your Pulse.
This device must be registered in order for it to function
properly. Your instructor will give your information about
the preferred method for your class.
Left Navigation
Backspace
Alpha/Numeric/
SMS Entry
Plus/Minus
Jump/Search
Press key to jump to a question in a
self-paced test or homework assignment.
Press and hold key to search for the next
unanswered question.
866.746.3015
MENU
Press to access the Main Menu.
Press the Navigation keys to scroll the Menu.
Press the Enter key to select a menu item.
Join - Press the Enter key. Type the Join Code for
the Class.
Channel
left corner of the Screen.
Clicker #
Greeting
Right Navigation
on the Pulse. Press the Enter key, type your
greeting, press the Enter key again to save it.
Enter/Send
Contrast
contrast from low contrast (1) to high contrast (6).
Diagnostic
your Pulse type, the signal strength, and
firmware version.
Symbol
Press key multiple times to
cycle through Symbols Table.
SYMBOLS TABLE
. Period
, Comma
/ Division
* Multiplication
+ Plus
- Minus
Space
( Open Parenthesis
) Close Parenthesis
x
TURNINGTECHNOLOGIES.COM
- Displays the Channel # in the upper
- Displays the clicker's assigned number.
- The Greeting displays when you turn
- Press the Navigation keys to adjust the
- Displays the Pulse's Serial number,
y
= Equal
> Greater than
< Less than
≥ Greater than or equal
≤ Less than or equal
| Pipe
√ Square Root
^ Caret
@ Email