keyto KT-SMART-D8 Quick Start Manual

TECHNICAL SPECIFICATIONS

• Operating System: Android 11.0
• Processor: Octa Core CPU, 4 * A53 @ 2.0 GHz + 4 *
• Memory: 64GB ROM + 4GB RAM LPDDR4 (Micro SD up to 32GB)
• Display: 4.0 Inch WVGA TFTMIPS 800 * 480 High definition
• Multi-touch , support Glove operation
• Communication: 4G/3G/2G, WiFi: IEEE 802.11 a/b/g/n/ac (2.4G/5G),
Bluetooth: Bluetooth Ver 5.0
• Rear Camera: 13MP AF, Front Camera: 2M FF
• Scan Engine: E3 Professional Engine
• Card Reader: NFC / NXP PN7150
• Sensors: Light sensor / Proximity / G-sensor / Gyroscope
• Memory: External Memory card supports Hot plug up to 64GB
• Peripheral SIM Card Slot: 2 x NANO SIM / 1 x Type C USB-C Slot
• Certification: CE / FCC / Google GMS / UN38.

Warning

• Read all instructions and safety information before use to avoid injury.
• The limit operating ambient temperature of the device declared by the manufacturer is -
10~45°C.

Battery safety

• Charge battery only at ambient temperatures ranging from 0~40°C.
• Dispose of used batteries according to manufacturer's instructions.
• Danger of explosion if battery is incorrectly replaced. Replace only with the same or equivalent
type of battery recommended by the manufacturer.

Statement

• The equipment damage caused by natural disasters, falling, self disassembly and non-
compliance with the operation specifications is not covered by the free warranty.
A53@1.5GHz
KT-SMART-D8
DATA COLLECTION DEVICE
Quick Start Guide
www.menastoretd.com
ANDROID 11