Table of Contents
Advertisement
1. Place your fingernail in the small slot at the bottom of the phone, lift and remove the
cover.
2. If the battery is in the phone, lift it out.
3. Slide the first SIM into SIM slot 1 with the contact area face down. Slide the second
SIM into SIM slot 2. Both SIM cards are available at the same time when the device is
not being used, but while one SIM card is active, for example, making a call, the other
may be unavailable.
4. If you have a memory card, slide the memory card into the memory card slot.
5. Line up the battery contacts, and put the battery in.
6. Replace the back cover.
Switch on your phone
- Press and hold the function key (6).
Charge your phone
- Your battery has been partially charged at the factory, but you may need to recharge it
before you can use your phone.
1. Plug the charger into a wall outlet.
2. Connect the charger to the phone. When done, unplug the charger from the phone,
then from the wall outlet.
Lock or unlock the keys:
1. Lock the keypad: select Go to > Lock keypad
Advertisement
Table of Contents
