KegLand RAPT KL24334 Instruction Manual

KegLand RAPT KL24334 Instruction Manual

Bluetooth thermometer

Advertisement

Quick Links

KL24334 – RAPT Bluetooth Thermometer Instruction Manual
RAPT Bluetooth Thermometer
KL24334
Instruction Manual
KegLand Distribution PTY LTD
www.KegLand.com.au
1
7
www.KegLand.com.au
Last Updated 25/08/2022 17:23 PM
Page
of

Advertisement

Table of Contents
loading

Summary of Contents for KegLand RAPT KL24334

  • Page 1 KL24334 – RAPT Bluetooth Thermometer Instruction Manual RAPT Bluetooth Thermometer KL24334 Instruction Manual KegLand Distribution PTY LTD www.KegLand.com.au www.KegLand.com.au Last Updated 25/08/2022 17:23 PM Page...
  • Page 2: Table Of Contents

    Super Kill Ethyl Sanitiser Spray. • Do not use any non-approved probes with this Bluetooth thermometer. • Changes or modifications to this unit which are not approved by KegLand may result in warranty being void. www.KegLand.com.au Last Updated 25/08/2022 17:23 PM Page...
  • Page 3: Battery Installation

    When the temperature probe is plugged into the device the display will show the temperature measured by the probe. If three dashes are shown on the display then this means that the temperature probe may be unplugged or faulty. www.KegLand.com.au Last Updated 25/08/2022 17:23 PM Page...
  • Page 4: Sleep Mode

    4. Submerge the temperature probe into the liquid you wish to measure. The temperature measured by your RAPT Bluetooth thermometer will then automatically transmit to your bonded device. Set the RAPT Bluetooth Thermometer to be the controlling temperature sensor for your BrewZilla or RAPT Temperature Controller. www.KegLand.com.au Last Updated 25/08/2022 17:23 PM Page...
  • Page 5: Bluetooth Bonding To A Rapt Device

    RAPT Temperature Controller, RAPT Fermentation Chamber or Gen 4 BrewZilla will then cycle the heating or cooling (if applicable) on, according to the temperature measured by the RAPT Bluetooth Thermometer and not by the built-in probe on the RAPT Controller or BrewZilla. www.KegLand.com.au Last Updated 25/08/2022 17:23 PM Page...
  • Page 6: Using The Rapt Bluetooth Thermometer To Measure And Control Mash Temperature

    1. Bond the RAPT Bluetooth Thermometer to your BrewZilla Controller 2. Set the RAPT Bluetooth Thermometer as the controlling temperature sensor. 3. Set your required mash temperature on your BrewZilla controller. Insert the probe of the RAPT Bluetooth Thermometer into your mash. www.KegLand.com.au Last Updated 25/08/2022 17:23 PM Page...
  • Page 7: Using The Rapt Bluetooth Thermometer To Measure And Control Distillation

    If you purchased your unit from an international distributor, you will be required to go through their warranty claims process. For full terms and conditions, please visit our website here -> Terms & Conditions www.KegLand.com.au Last Updated 25/08/2022 17:23 PM Page...

Table of Contents