Advertisement
Quick Links
Hydraulic Chain Saws
Models ACH000-12, ACH000-14, ACH000-16, ACS-70 and ACS-80
A Full Line of Hydraulic Pruning Tools
Specifications
Max. pressure ............. 2000 PSI (130 bar)
Flow range .................. 4-8 GPM (15-30 LPM)
Hose size .................... 3/8" - I.D. minimum
Inlet port ...................... 3/8" JIC - #6
Outlet port ................... 3/8" JIC - #6
Foreign particles ......... 10 micron max.
SAFETY!
WE URGE YOU TO READ AND UNDERSTAND ALL THE SAFETY
INSTRUCTIONS IN THE OPERATION AND SERVICE MANUAL
BEFORE SERVICING THIS TOOL
CS Unitec, Inc., 22 Harbor Ave., Norwalk, CT 06850 • Toll-free: 800-700-5919 • Phone: 203-853-9522 • Email: info@csunitec.com
www.csunitec.com
Advertisement
Related Manuals for Unitec ACH000-12
Summary of Contents for Unitec ACH000-12
- Page 1 WE URGE YOU TO READ AND UNDERSTAND ALL THE SAFETY INSTRUCTIONS IN THE OPERATION AND SERVICE MANUAL BEFORE SERVICING THIS TOOL CS Unitec, Inc., 22 Harbor Ave., Norwalk, CT 06850 • Toll-free: 800-700-5919 • Phone: 203-853-9522 • Email: info@csunitec.com www.csunitec.com...
- Page 2 CS Unitec, Inc., 22 Harbor Ave., Norwalk, CT 06850 • Toll-free: 800-700-5919 • Phone: 203-853-9522 • Email: info@csunitec.com www.csunitec.com...
- Page 3 00640069 O-Ring – (2 - 012) 00650199 Seal Kit Bolt 00650064 00640232 Stickers kit Bolt 00650241 00650000 Operation and Service Manual CS Unitec, Inc., 22 Harbor Ave., Norwalk, CT 06850 • Toll-free: 800-700-5919 • Phone: 203-853-9522 • Email: info@csunitec.com www.csunitec.com...
- Page 4 OPEN/CLOSED CENTER CIRCUIT DIRECTION OF FLOW The ACS model can be operated on an open or closed center hydraulic circuit. CHAIN TENSION ADJUSTMENT To convert from open closed center circuit: a. Remove ultramid handle (8). b. Remove return hose. c. Remove return hose connector (5). d.