Table of Contents
Advertisement
Quick Links
Advertisement
Table of Contents
Summary of Contents for Shoreline Biome Shoreline Breaker
- Page 1 Shoreline Breaker™ User Manual...
- Page 2 This document and its contents are proprietary to Shoreline Biome, LLC and are intended solely for the contractual use of its customer in connection with the use of the product(s) described herein and for no other purpose.
-
Page 3: Table Of Contents
Shoreline Breaker™ User Manual Page | 3 SHORELINE BIOME IN CONNECTION WITH CUSTOMER'S ACQUISITION OF SUCH PRODUCT(S). All names, logos, and trademarks are the property of their respective owners. Table of Contents Introduction Intended Use Safety Information Installation Operation Maintenance... -
Page 4: Introduction
Shoreline Breaker™ User Manual Page | 4 Introduction Before using the Shoreline Breaker™, it is essential you read this user manual carefully and pay particular attention to the safety information. The instructions and safety information in this user manual must be followed to ensure safe operation of the Shoreline Breaker™... - Page 5 Shoreline Breaker™ User Manual Page | 5 Samples may contain infectious agents. You should be aware of the health hazard presented by such agents and should use, store, and dispose of such samples according to the required safety regulations. Damage to the instrument Do not lift the instrument by holding the tube holder.
-
Page 6: Installation
Insert the power cable into the Shoreline Breaker™ base. (Figure 1) Figure 1. Place the Shoreline Breaker™ on the bench and, holding the base of the unit, press down firmly to secure the suction cups to the bench. (Figure 2). - Page 7 Shoreline Breaker™ User Manual Page | 7 Figure 2. Do not plug the Shoreline Breaker™ in until ready to use it.
-
Page 8: Operation
Shoreline Breaker™ User Manual Page | 8 Operation Before using the Shoreline Breaker™, press the base of the unit to ensure that the suction cups are fully engaged and plug the system into the wall outlet. Prepare the samples according to the Shoreline Breaker™ Prep instructions from the kit;... - Page 9 When finished, remove the bead lysis tubes from the Breaker™ for purification according to the Prep Kit instructions. “Emergency” Stop In the event of an emergency, press the green button again to interrupt the Shoreline Breaker™. Alternatively, the system may be unplugged to interrupt the device.
-
Page 10: Maintenance
Shoreline Breaker™ User Manual Page | 10 Maintenance Cleaning Unplug unit before cleaning. The housing of the unit can be cleaned with a sponge or a damp cloth moistened with water or 70% ethanol. Be sure unit is completely dry before plugging back into an electrical outlet. -
Page 11: Technical Data
Shoreline Breaker™ User Manual Page | 11 Technical Data Operating Conditions Power 115 V 60 Hz / 230 V 50 Hz (autosensing) Place of Operation For indoor use only Storage Conditions Temperature Store in a dry area at a temperature between 32°F and 120°F (0°C and 49°C) -
Page 12: Warranty And Liability
PURCHASE PRICE OF THE PRODUCT. Liability clause Shoreline Biome shall be released from all obligations under its warranty in the event repairs or modifications are made by persons other than its own personnel, except in cases where the Company has given its written consent to perform such repairs or modifications. - Page 13 Shoreline Breaker™ User Manual Page | 13 which are inconsistent or in conflict with the conditions in this warranty shall not be binding upon the Company unless produced in writing and approved by an officer of Shoreline Biome.
- Page 14 Shoreline Breaker™ User Manual Page | 14 Appendix A: Shoreline Breaker™ Prep Kits The only bead-beating kits approved for use on the Shoreline Breaker™ are listed below in Table A-1. Catalog Prep Kit Name Description Number Shoreline Breaker™ Prep – 16...
Need help?
Do you have a question about the Shoreline Breaker and is the answer not in the manual?
Questions and answers