Do you have a question about the D9 Series and is the answer not in the manual?
Questions and answers
Phil swartz
March 23, 2025
Left ear will not turn on
1 comments:
Mr. Anderson
March 23, 2025
The manual suggests checking if the charging box is working properly. If the left ear of the Arptur D9 Series won't turn on, ensure that the device is charged and that the charging box functions correctly.
Page 3
Congratulations Thank you for choosing a new rechargeable Bluetooth hearing devices—— D9 series. This is a multi-channel digital hearing device. It supports Bluetooth 5.0 By connecting mobile phones and other Bluetooth transmitters, you can easily make calls, listen to music, watch TV and other audio directly.
Table Of Contents • Getting to know your device·········································6 • How to Turn on/off devices············································7 • Adjusting volume levels··················································8 • How to change programs··············································9 • How to wear the device·················································11 • Pair with mobile phone··················································12 • How to make calls and listen to music·······················14 •...
How To Turn On/Off Devices • Turn on - Automatic: take it out of the charging box; - Manual: press and hold the VC button for 5S to turn on. • Turn off - Automatic: put it back in the charging box; - Manual: Press and hold the VC button for 5S to turn off.
Adjusting Volume Levels • When in amplifier mode: - Short press the VC button on device to adjust the volume levels - Volume levels change in cycle, such as 1...5...10...1...5...10. (Short press) • When in bluetooth mode: Volume levels need to be adjusted on your phone. Tips: You will hear a SINGLE beep when the volume is adjusted.
How To Change Programs Long press the VC button on device for 2s to change programs. Programs change in cycle, such as 1-2-3-1-2-3 • P1: quiet • P2: noise reduction • P3: deep noise reduction you will hear the beep(s). (Press and hold for 2 s) Tips: Devices will remember the setting that used last time.
Page 10
Programs Introduction 3 Programs Environment Alert In a constant quiet environment P1: Speech like at home having a Beep conversation with people. In a noise restaurant having Beep, a conversation with people Restaurant beep beside you. Beep, In a loud place with limited noise P3: Road beep, level around you.
How To Wear The Device • Hold your hearing device with your thumb and forefinger. • Gently insert the device into your ear canal. • Gently push the hearing device into your ear until it feels comfortable in your canal. •...
Pair With Mobile Phone For The First Time •Take the hearing device out of the charging box. •Turn on the Bluetooth in your phone settings to allow the phone communicate with the D900. •You can wear it normally after pairing successfully.
Page 13
Tips: The First connection requires manual pairing, and the second and subsequent connections are automatic connections (if the phone is diffficult to connect, please connect manually). When the mobile phone is not connected within 3 minutes after the signal search, the Bluetooth function will be turned off.
How To Make Calls And Listen To Music After completing the pairing, wear your hearing devices. • Answer the call: short press the VC button on one device to answer the call or press the answer on your mobile phone. •...
Page 15
How To Make Calls And Listen To Music After completing the pairing, wear your hearing devices. Open the music/video on the mobile phone and play it, and then you can hear the music/video. • Stop playback: short press the VC button to stop or stoping on the phone, and then the devices will automatically switch to amplifier mode.
Page 16
Prompt Tone • Turn off devices: POWER OFF; • Bluetooth connection is successful: CONNECTED. • Low voltage prompt: LOW BATTERY Tips: After the Bluetooth connection is successful. • When you have been wearing the hearing devices, the Bluetooth will always be connected. •...
Charging Box ① Power Indicator • Charging: white • Discharge: white • Full charge: light off ② Devices Charging Indicators ① • Charging: ② Breathing light white • Full charge:lights off ③ Type-C charging interface ③ Tips: It takes 2-3 hours for a pair of devices to be fully charged, and the charging case will automatically stop charging the devices after it is fully charged.
Charging The Hearing Devices • This product includes the hearing devices and a charging case. • Before using the hearing devices for the first time, it is recommended that you charge it for 3-4 hours. • The hearing devices has a built-in and non-removable rechargeable battery.
Battery Reminder • When the mobile phone is paired with Bluetooth, the hearing aid function and the Bluetooth audio function exist at the same time, and they are automatically switched according to the user ‘s operation needs. • When the battery is low, the Bluetooth connection function will automatically disconnect and notice: low battery, please charge.
Hear Better In 4 Steps STEP 1: Dome size A right size eardome would feel secure and tight in your canal. STEP 2: Programs Choose the right program for your environment. STEP 3: Volume Slowly increasing the volume as needed. STEP 4: MAINTENANCE Clean your devices regularly and replace eardome as needed.
Maintenance • Daily maintenance your hearing devices After taking off the hearing devices, clean earwax and debris from the device eardome sound outlet and the microphone using the provided cleaning brush. • Weekly maintance Wipe charging case and hearing devices body witha soft lint-free cloth.
Changing Ear Dome Removing the domes • Pinch the body of the device, turn the eardome upside down. • pinch under the dome and wiggle slightly to pull it off the device. Installing the domes • Tilte the eardome head at 45° . •...
Page 23
TIPS: • Whistling/feedback occurs when amplified sound leaks out of the ear and returns to the device microphone and is re-amplified. • If you experience feedback at higher volumes tr y changing a new dome with right size for you. •...
Trouble Shooting Malfunction Solution Hearing amplifiers don’t • Make sure that the charging box works power on normally, and the hearing device is charged. (no amplification) Hearing • Adjust the volume to maximum first, then amplifiers aren’t slowly reduce. loud enough (not enough •...
Page 25
Malfunction Solution • Make sure that you’re placing the hearing amplifiers on correctly(secure and tight). Hearing • Choose another eartip size, You may need amplifiers whistle a different size for each ear. • Decrease the volume. • Make sure that you’re putting the hearing amplifiers on correctly(secure and tight).
Product Parameters • Bluetooth protocol: HFP/A2DP/AVRCP • Bluetooth specification: Bluetooth 5.0 • Communication distance: 6 meters (barrier-free) • Working hours: Music play only is up to about 6-7hours (affected by volume and audio content); When the Bluetooth is disconnected, the hearing aid function is up to about 35 hours;...
Hearing Rehabilitation Plan Hearing devices reproduce an abundance of sounds which frequently haven’t been experienced for many years. Every person reacts differently the first time he or she wears hearing device. The familiarization phase therefore differs from person to person. Below is a rehabilitation plan for first time users or those using new hearing device.
Page 28
Hearing Rehabilitation Plan a) The First Stage (week 1) 1 to 2 hours wearing per day, you are suggested to wear in a relatively quiet environment to familiarize and distinguish various sounds. b) The Second Stage (week 2) 4 to 8 hours wearing per day, you may wear your hearing devices and walk in a relatively quiet environment to listen around.
Need help?
Do you have a question about the D9 Series and is the answer not in the manual?
Questions and answers
Left ear will not turn on
The manual suggests checking if the charging box is working properly. If the left ear of the Arptur D9 Series won't turn on, ensure that the device is charged and that the charging box functions correctly.
This answer is automatically generated