Table of Contents
Advertisement
User manual
12 Storage and transportation requirements
Store the device in the original packaging of the manufacturer in a dry, closed ventilated room
•
with a temperature range from + 5˚C to + 40˚C and relative humidity up to 70%.
•
The storage area must not contain aggressive vapours and mixtures of chemicals that cause
corrosion and impair insulation and sealing.
Use a suitable lifting device for handling and storage to prevent possible damage to the device.
•
•
Observe the requirements that apply to the handling of a particular type of load.
•
The device can be transported in its original packaging by any mode of transport that provides
adequate protection against precipitation and mechanical damage. The device should only be
transported in the working position.
•
Avoid sharp shocks, scratches or rough handling during loading and unloading.
•
Allow the device to warm up to operating temperature for at least 3-4 hours before the first start-
up after transport at low temperatures.
36
FLEXI 50
Advertisement
Table of Contents
