Samsung CE1110R Service Manual page 9

4-3 Replacement of Door Assembly
4-3-1 Removal of Door Assembly
Remove hex bolts securing the upper hinge and lower
hinge. Then remove the door assembly.
Screw
Screw
Upper Hinge
Upper Hinge
Screw
Screw
Lower Hinge
4-3-2 Removal of Door "C"
Insert fl at screwdriver into the gap between Door "A"
and Door "C" to remove Door "C". Be careful when
handling Door "C" because it is fragile.Then remove the
door assembly.
Door "C"
4-3-3 Removal of Door "E"
Door "E"
Following the procedure as shown in the fi gure,
insert and bend a thin metal plate between Door
"E" and Door "A" until you hear the 'tick' sound.
1. Insertion depth of the thin metal plate should be
0.5mm or less.
4-3-4 Removal of Key Door & Spring
Remove pin hinge from Door "E"
Detach spring from Door "E" and key door.
Door "E"
Key Door
Spring
- 6 -