Advertisement
12 Alignment
12.1. Pedestal setting
INPUT
Equipment
1 RF
Sub Bright
Pattern
Black 2 %
Black 0 %
2 HD
Sub Bright
Pattern
Black 2 %
Black 0 %
Setting
Alignment menu
Picture:
PANEL W/B
Normal
R cut off 1) Set R,G and B cut off to " 80 ".
Colour balance:
G cut off
Cool
B cut off
Aspect:
Chroma Control:
16:9
Gun off 2) Set Gun off to " 5 ". (Only green pixels can emit.)
RGB Sub Adjust:
G Sub Bright 1 3) Adjust G Sub bright 1 to start some of green pixels emission
Chroma Control:
Gun off 4) Set Gun off to " 3 ". (Only blue pixels can emit.)
RGB Sub Adjust:
B Sub Bright 1 5) Adjust B Sub bright 1 to start some of blue pixels emission
Chroma Control:
Gun off 6) Set Gun off to " 6 ". (Only red pixels can emit.)
RGB Sub Adjust:
R Sub Bright 1 7) Adjust R Sub bright 1 to start some of red pixels emission
Picture:
Normal PANEL W/B
Colour balance:
R,G,B cut off 2) Repeat procedure 1) to 7) of Component input signal.
Cool PANEL W/B
Aspect:
R,G,B Drive
16:9
** Adjust at the dark room.
at black 2% area and no emission at black 0% area.
at black 2% area and no emission at black 0% area.
at black 2% area and no emission at black 0% area.
1) Change input to HD signal.
31
TH-42PA20E / TH-42PA20B
Procedure
Advertisement
