Amino STB JSTV-i User Manual

AMINO STB User Guide
You can enjoy JSTV-i on TV when you connect AMINO STB to your TV
with HDMI cable. To ensure a stable connection, we strongly
recommend the use of wired connection (Ethernet) via a LAN cable
when connecting the STB to the internet. In case you wish to connect via
Wi-Fi connection, a Wi-Fi extender* with ethernet port is necessary. For
more information, please visit www.jstv.co.uk.
CABLE CONNECTION
①
① HDMI Cable : Connect to TV with enclosed HDMI cable
② LAN Cable : Connect with router (or Wi-Fi Extender).
You need to get a LAN Cable long enough to connect your STB and
router (or Wi-Fi Extender) from local electric shops or online shops.
For the information about Wi-Fi connection, please visit JSTV website
or call JSTV Customer Service.
③ Power Cable : Please insert power cable at the end.
Do not press down the RESET button when you connect the
power cable. It will reset the STB and you won't be able to watch
JSTV.
The RESET button located right next to the power cable
connection.
Please always use the power cable supplied. Do not use any
power cable from different device even it looks the same. This
causes the STB to be damaged and it cannot be repaired.
SIGN IN (Please refer page 2 for remote control operation)
① Enter your JSTV-i username with numeric / alphabet button.
② Move down to the password field with arrow button.
③ Press OK button and the colour of the password field will change from blue to
orange. Now it's ready to enter your password.
④ Select "SIGN IN" with arrow button and press OK button.
※ To switch off the STB, please make sure that it's selecting "SING IN" and then
switch off with power button on the remote control. If Username or
Password field is active, you are not able to switch off the STB with remote
control.
SELECT CHANNEL
You can select the channel with numeric button. 1 is for JSTV1, and 2 is for
JSTV2.
②
You will be able to change the channel while you are watching by pressing
the numeric button.
MENU LANGUAGE
You can change your language preference by colour buttons on the remote
control at anytime.
Red = Japanese
AUDIO LANGUAGE
③
Some news and programmes such as sumo which are marked with (B) in a
program guide, are broadcasted in two languages.
1.
2.
3.
4.
5.
6.
7.
Set up for JSTV-i
Green = English
Press the Menu button on the Amino remote control.
Move the cursor to the Audio second from the top and press OK.
Press OK while the top Primary language is highlighted in orange.
Using the right and left arrow buttons next to the OK button on the remote
control, choose English for English language and choose any except English
for Japanese language.
Press OK again to confirm the setting.
Press the back button on the remote control twice to clear the menu screen.
If a Security Issue error message is displayed after this, press the OK button
to close it.
JSTV Customer Service
+44-(0)20-7426-7330
Monday to Friday 9:00-16:00(UK) 10:00-17:00(CET)
customerservice@jstv.co.uk
1