Advertisement
4.) Attach one of the Markerboard Panel (P-2) to the front side of the Welded Legs (P-1) as shown in
Illustration #3. Secure these two parts together using one Threaded Post (B) and one Screw (A).
Finger tighten only at this time and repeat this for each mount hole. Repeat this Step to attach the
second Markerboard Panel (P-2). When all the mounting Screws are in place, tighten all Screws
using two Allen Wrenches (D).
The BestRite product you have purchased is guaranteed against material and workmanship defects. This guarantee
extends 1 year from date of purchase. Should this product fail to function satisfactorily under normal use due to
defect or imperfection, the defective part or product will be replaced. Damage caused by common carriers during
shipment is not included in this guarantee. Do not use unless all screws are tight. At least every six months, check all
screws to be sure they are tight. If parts are missing, broken, damaged, or worn, stop use of the product until repairs
are made by your dealer using factory authorized parts.
This guarantee sets forth all applicable guarantees and remedies. No other warranty, expressed or implied
shall apply. Failure to follow instructions found in Important Information Section of Owner Sheet shall void
the guarantee. Consequential or incidental damages and or costs are not refundable.
P-1
D
B
Important
D
A
P-2
Illustration # 3
Advertisement
