Summary of Contents for Omnitec FLAT-2
- Page 1 FECHA: Lock Installation Instructions FLAT2 INSTRUCTIONS MANUAL FLAT-2 LOCK HOTEL: ADDRESS: LOCATION: PHONE: FAX: E-MAIL: OMNITEC DISTRIBUTOR: CONTACT: ADDRESS: LOCATION: PHONE: FAX: E-MAIL: ESP Rev 02...
- Page 2 FECHA: Lock Installation Instructions FLAT2 REQUIREMENTS FOR THE INSTALLATION OF THE LOCK. ESP Rev 02...
- Page 3 FECHA: Lock Installation Instructions FLAT2 fig.1 ESP Rev 02...
- Page 4 FECHA: Lock Installation Instructions FLAT2 EXPLODED VIEW OF THE LOCK Manilla habitación Room handle Poignée de Salle 4 baterias x AA Alkalina 4 batteries AA Alkaline 4 Batterie AA Alkaline Cuadradillo 8x8mm x 70 mm Spindle 8x8x70mm Carré poignée 8x8x70mm Cilindro emergencia Emergency lock Serrure d'urgence...
- Page 5 6. Finally, install the two M5 screws (7) to fix both front Ask Omnitec Systems or your distributor for information to help you choose the recessed mechanical latch available for this model. (help page 10, end of document) ESP Rev 02...
- Page 6 5. Approach the two fronts to the Door and match the spindle (3) with the interior latch or latch. 6. Finally, install the two M5 screws (7) to fix both front Ask Omnitec Systems or your distributor for information to help you choose the mortise lock available for this model. ESP Rev 02...
-
Page 7: Especificaciones Técnicas
FECHA: Lock Installation Instructions FLAT2 ESPECIFICACIONES TÉCNICAS ESP Rev 02... - Page 8 (4) from the exterior front. In the same location, you can also access a type C connector (2), to introduce voltage (6V), in case the batteries are depleted. To download the APP, please contact info@omnitec.es or request information from your distributor. ESP Rev 02...
- Page 9 FECHA: Lock Installation Instructions FLAT2 CHANGE OF CHANGE OF HANDLE To change the handle or turn the handle, just follow these simple steps: On the back of both fronts of the FLAT2 lock, inside the handle, we find a M5x20mm screw with a phillips head, with the help of a screwdriver, we will remove it.
- Page 10 FECHA: Lock Installation Instructions FLAT2 RECOMMENDATIONS IN THE CHOICE OF THE LATCH The handle of your choice must meet the minimum requirements for proper installation. We will explain below. The recommended latch must maintain established minimum measures, A, B, C, according to the annex.
- Page 11 FECHA: Lock Installation Instructions FLAT2 C - The minimum diameter of the holes will be 6.5mm Note.- to install the FLAT2 model lock on this type of latch, with measures of at least 6.5mm, the customer will have to request 2 auxiliary spacers from their distributor or authorized seller (Code of auxiliary cylindrical spacers parts 2 units x 971096) ESP Rev 02...
- Page 12 - Check that the door opens and closes correctly, that there are no significant gaps between the latch and the frame strike. Omnitec Systems s.l. It has a technical department at your disposal in case you want to ask any questions about the installation.
Need help?
Do you have a question about the FLAT-2 and is the answer not in the manual?
Questions and answers