Cleaning And Storage; Specifications - HOMEBASIX 4672713 Operating Instructions Manual

3) PLUG IN AND TURN ON
IF YOUR HEATER FAILS TO OPERATE
Be sure it is plugged in and that the electrical outlet is working.

Check for any obstruction. If you find an obstruction, turn the heater OFF.

Unplug the heater and wait at least ten minutes for cool-down. Carefully
remove the obstruction. Re-plug the heater in and restart it as described in
OPERATION section.
If you still notice the same defect, detach the plug from the outlet and have

the appliance checked by service personnel only.

CLEANING AND STORAGE

We recommend that the heater be cleaned at least once a month and before
storage.
Turn the heater OFF and unplug it. Allow it to cool before handling and

storing.
Use a dry cloth to clean the external surfaces of the heater.

DO NOT USE WATER, WAX, POLISH OR ANY CHEMICAL SOLUTION.
Clean your heater by the above-mentioned steps, then pack the heater in

its original container and store it in a cool dry place.
This heater is not disassembled.

Under normal use and circumstances, the motor is factory lubricated and

will require no further lubrication.
The glass panel should be cleaned carefully with a soft cloth. DO NOT

use proprietary glass cleaners.

SPECIFICATIONS

Voltage: 120V, 60Hz
Current: Maximum 12.5 Amps
Power: 1500 Watts
Limited One-Year Warranty
HomeBasix warrants this product to be free of defects in material and
workmanship for the applications specified in the Owner's Manual for a
period of one year from date of purchase. This warranty only applies to
the original purchaser of this product.
This warranty excludes damage, accidental or otherwise, to the unit not
caused by a defect in material or workmanship.
The warranty also excludes damage caused by misuse, tampering,
modification, misassembly, repairs or alterations, or failure to adequately
10