StattQualm SQuape Quick Start Manual

PRODUCT DESCRIPTION / HOW TO DO THE WICK

Technical Data


Rebuildable atomizer / Tank atomizer in stainless steel casing

Material Tank:

Surface:

Material Base:

AtomizerChamber: Aluminium, ematal coated not conductive

Windows:

Diameter:

Height:

Weight:

Volume:

Airflow:

Center Pin:

Accessories:

Optional:
Description:
The SQuape was developed with the intention to make it a most ideal and manageable atomizer. As a reliable
everyday product it's for the ease of expert vapers as well as for rebuildable atomizer newbies. In addition the
developers wanted to make the product most cost effective for the optimum in comfort and everyday usage.
The SQuape is made from stainless steel, rebuildable atomizer, 100% produced in Switzerland. Along with an
appealing look the atomizer is especially convincing by its high functionality. The device allows for easy doing
the wick, it is short circuit safe; this is due to the spellbound electrical impulses. (The device is coated with the
ematal coating and an aluminium surface finish*). Short circuit messages are a thing of the past since the
intelligent battery carrier. The SQuape will be sent in fully constructed usable condition, additionally these
replacement items will be included: spare screws, o-rings, one hexagon wrench as well as a specifically to the
SQuape engineered Drip Tip.
*
Ematal is an intensive process in the making of the topcoat for the aluminium item. In opposition to other specific oxidation methods
this is supreme to a higher dimensional and a very tight surface structure. The anodic process adds a permanent and virtually scratch
resistant surface to the functional parts made from aluminium. Highly stressed parts such as high pressure relief valves or materials
from medical components which are made out of aluminium undergo this process. This is utilized due to the fact that there is less
roughness by the movable parts thus less costly lubrication is required. Our advantage: ematal coated aluminium items are non-
conductors!
StattQualm – January 2014
Stainless steel
Raw in two different rotary stages
Stainless steel
PAS-PMMA XT, colorless (o-ring tight,
threadless)
22.7mm
55mm (without Drip Tip)
82 g
maxium 5.2ml
via lateral opening with the 510er –
threaded connection
Adjustable
Drip Tip, spare screws and o-rings, additionally an hexagon wrench to remove
the bell)
Perfectly seated ProVari-Cone