1. Manuals
  2. Brands
  3. eSSL Manuals
  4. Automatic Barriers
  5. BG-CM-300
  6. User manual

eSSL BG-CM-300 User Manual

Boom barrier
Hide thumbs
Table of Contents

Advertisement

Quick Links

Download this manual
USER MANUAL
Boom Barrier BG-CM-300

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the BG-CM-300 and is the answer not in the manual?

Questions and answers

Subscribe to Our Youtube Channel

Related Manuals for eSSL BG-CM-300

Summary of Contents for eSSL BG-CM-300

  • Page 1 USER MANUAL Boom Barrier BG-CM-300...
  • Page 2 WARNING AUTOMATIC BARRIERS ARE NOT FOR PEDESTRIAN! To reduce the risk of INJURY or DEATH, read and follow all instructions. NEVER let children operate or play with barrier control. Controller MUST be installed at least 1.5m above the ground. PEDESTRIANS SHOULD NOT CROSS THE PATH OF THE MOVING BARRIER. Automatic boom barrier is designed for vehicles ONLY.
  • Page 3 1. Direction Definition and Main Components of the Machine A.Close to Right B.Close to Left C.Main Components of the Motor Motor Boom Holder Mounting Bracket Limit stopper...

  • Page 4: Specification

    2. Features A. Remote control is allowed. B. During power outage, product can be manual operated. C. Control board contains various ports for parking lot management system, infrared sensor, radar, etc. D. Product contains multiple limit protection functions to keep a long life time. 3.

  • Page 5: Cabinet Installation

    4. Installation 4.1 Cabinet Installation Open the Cabinet door and take out the attachment pack. Place the Cabinet at desired position. Place Fixed Bars on the bottom of the Cabinet inside. Mark out the boreholes for Expansion Bolts (Fig. 3: L and W) according to the Fixed Bars. Move away the cabinet.
  • Page 6 5. Setting Springs’ Balance with Boom Weight Attention: The springs are set to be balanced in factory. DO NOT change the boom length or weight if it is not necessary. If the boom length or weight must be changed (e.g.: adding a Stop Sign on the boom), the balance must be adjusted by a qualified service person.

  • Page 7: Control Board Diagram

    6. Control Board Diagram 6.1 Electrical connections RS485-B RS485-A Postiton Output Of Open Position Output Of Close 12V/500mA Infrared Sensor LOOP Detector STOP CLOSE OPEN Brown Wire Black Wire White Wire Blue Wire Green Light Red Light...
  • Page 8 6.2 Limits Setting Power on Press and hold “SET” till display “P1" Adjust “F7" to change the Press “OPEN” and see motor’s running direction the boom moving Is the barrier open? Press and hold “OPEN” Press “SET” to save open till the barrier is vertical limit, display “P2”...

  • Page 9: Function Parameter Setting

    6.3 Function Parameter setting Power on Shortly press “Set” Display “77” Press “Open” or “Close” to change value Display “77” or “81” Press “Set” “79” : Function “81” : Timer Parameter Parameter Press “Open” or “Close” to change corresponding value Press “Stop”...
  • Page 10 6.3.1 Function Parameters...
  • Page 11 7. Transmitter ( Remote control ) setting...

  • Page 12: Packing List

    8. Maintain 9. Packing list Name Quantity Mark 1set Barrier Boom 1pcs Double end bolt 2pcs Cap nut 4pcs Flat washer 4pcs Φ Spring washer 4pcs Φ Gasket 2pcs 2pcs Anchoring M14*140 2pcs Control unit Inciuding 2pcs remotes 1pcs 1pcs Manual...
  • Page 13 #24, Shambavi Building, 23rd Main, Marenahalli, JP Nagar 2nd Phase, Bengaluru - 560078 Phone : 91-8026090500 | Email : sales@esslsecurity.com www.esslsecurity.com...

Table of Contents