Summary of Contents for UP 9651EDGE05
- Page 1 Quick Start Guide Cable Kit P/N: 9651EDGE05 User Manual for assembling Cable Kit for UP Xtreme Edge Computing System with Whiskey Lake CPU Revision: Update Date: 14 February 2020 Prepared For: UP Shop User AAEON WendyLee 李宏芸 Prepared By: AAEON Europe...
-
Page 2: Revision History
Revision History The following table contains the information regarding the history and revisions of this living document. Version Date Contributor Changes Description Document Attributes The following table contains the list of files that are associated with this living document. Filename Description Copyright ©... -
Page 3: Package List
Package List Quantity Item NO. Description 1703401600 MCU Cable,160mm 1703401301 GPIO Cable,40Pin Hat,130mm 1709103100 Debug Cable,310mm 1701100180 COM Cable,150mm S1A5004050 Screw for MCU cable and GPIO cable S21D305011 Screw for COM Cable S1ZC002110 Screw for Debug Cable S1A5004050 S21D305011 S1ZC002110 Copyright ©... - Page 4 CABLE Assembly STEP 1. Take the MCU cable(1703401600) to go through the chassis and connect the pin head to CN25 (STM32 connector) 1703401600 Copyright © AAEON Page 4 of 8...
- Page 5 2. Take the PCB and turn the CPU side downward and put it in the chassis Copyright © AAEON Page 5 of 8...
- Page 6 3. Take another GPIO cable (1703401301) to go through the Chassis and connect the pin head to the 40pin HAT 4. Take the two com ports cables (1701100180) and connect the pin head to COM1 and COM2 5. Take debug port cable (1709103100) and connect the pin head to CN16 1709103100 1703401301...
- Page 7 6.screw the both COM cables and MCU cable on the chassis. S21D305011 S1A5004050 Page 7 of 8 Copyright © AAEON...
- Page 8 6. screw the GPIO cable and screw the debug cable with the ring(S1ZC002110) on the chassis. S1A5004050 S1ZC002110 Copyright © AAEON Page 8 of 8...