Summary of Contents for ELEPRO R8+
- Page 1 USER MANUAL Low Power Consumption Mini Camera Mode：R8+ Please read this instruction manual carefully and use it correctly. After reading, please keep it in a safe place and read it when necessary. V3.0.3...
- Page 2 1. Know of the camera Package Power/reset contents Micro SD card slot l Camera x1 User manual x1 Lens l SD card reader x1 l 360°Rotating stand x1 l Charging cable x1 Motion detection sensor Charging port Indicator lighter Reset Power switch IR niight lights Light sensor...
-
Page 3: Set Up The Camera
2. Set up the camera [1] Charging 、 ON/OFF *Please charge before use 1) 5V (1A/2A) adaptor for mobile phone and micro- Reset USB cable is suitable for charging. 2) It takes about 6 hours for fully charged; the lamp will turn off automatically when fully charged. - Page 4 3. Get the app After registered UBOX account, you should get the verify e-mail from UBIA team. If not, please pay attentionto whether your mailbox identifies this e-mail as spam. Get the ‘O-KAM’ app for free Scan the QR code or search for ‘O-KAM’ Google Play or App Store 1) IOS devices 11.0 or higher, Android device 5.0 or higher is supported only.
- Page 5 4. Powering camera and connection the camera to app [1] Switch the camera power button to ‘ON’ Blinks blue slowly: Ready for connection ▲ For Wi-Fi connection, Blinking blue quickly: Connecting connect your device to your Lights blue: Connection completed home 2.4G Wi-Fi first and then Power switch proceed.
- Page 6 5. Connection without Wi-Fi AP connection steps (for viewing without Wi-Fi) If don't have Wi-Fi, connect device directly to the camera within 10M for real-time viewing and settings. ２ Android device warning Steps: switch on the camera, do resetting first, and then tap the Wi-Fi (hotspot) ‘LAICAM ***’ in the WLAN settings of your device as image 1 above, After the ‘!’...
- Page 7 6. Recommended app settings You can make general settings for the app in the ‘Mine’ section below Manual photos and recordings are recorded in an "album" from which you can download to your device or share them. Support Google Alexa Real-time viewing is possible with multiple cameras at the same time in home page...
- Page 8 7. Share camera to your family Share your camera with family and friends 1) Family and friends need to download the O-KAM app and register. 2) Send the shared QR code to your family and follow the instructions to add it. 3) There is no limit to the number of co- owners.
-
Page 9: App Features
8. App features オンライ人数 Add camera Home page Listing or Four screens display Camera name connection status Battery volume Wi-Fi status Camera system settings Push notification settings Memory card recordings Cloud storage recordings Real-time viewing Camera system settings page Cloud purchasing & settings Battery volume Wi-Fi status... -
Page 10: Camera Settings
9. Camera settings Camera name Camera serial number Wi-Fi status Camera connection status Purchase of cloud storage. (only detection recording can be recorded) Sleep /continuous recording /deep sleep mode settings Firmware update (to always update) Motion detection, human detection, detection plane Camera name editing, image inversion, device deletion, etc. - Page 11 10. Play back the events Deletion Fast forward Share Download You can playback in the app, and SD can also *When the be played back on a computer. Continuous recording Motion detection camera is bought online or viewed in real-time, / Viewing recording it will automatically record and save on SD card.
-
Page 12: Technical Specification
11. Technical specification ４K（４K Preview in App）/HD 2304*1296 /SD 640*360 Resolution Motion detection PIR (infrared detection) motion detection: about 5m Have 6 pieces 940nm infrared LEDs: about 8m (IR night vision) Night vision 2.4Ghz（Don’t support 5Ghz Wi-Fi） Wi-Fi Lens F=2.9 Battery 3200mAh Continuous recording time: about 13-15 hours;... -
Page 13: Faq And Support
12. FAQ and support Q1: Why doesn't the camera turn on normally? A1: If the battery is dead, please charge it. Note: If you set the indicator to be hidden in the app, once the power is turned off and then on, the operation indicator lamp of the camera will light up. Q2: Why can't I find the access point from the camera after turning on the camera? A2: You can find it with "AP connection". - Page 14 Q13: What should I do to set long-time recording? A13: Maximize standby time: Connect to Wi-Fi, turn off the display light, ‘Power mode’> ‘Deep sleep’, ‘Alarm setting’> ‘Human detection’ ON, ‘Push notification’ OFF, no touch the app; Maximize continuous recording time: Connect to Wi-Fi, turn off the indicator light, ‘Power mode’> ‘Continuous recording’, no touch the app.
-
Page 15: Having Trouble
13. Technical support Quality assurance One year warranty. In case of initial failure, we will replace it with a new one in principle. * Before making important recordings, be sure to confirm that the camera functions normally, and please forgive compensation for incidental damage caused by the failure of this product. Can't connect? You can scan this QR code to see the connection video...
Need help?
Do you have a question about the R8+ and is the answer not in the manual?
Questions and answers