Advertisement
Quick Links
Advertisement
Related Manuals for Mould King 16040
Summary of Contents for Mould King 16040
- Page 1 Mould King 16040 Magic Book Store...
- Page 2 Mould King 16040 Lighting Kits Installation Instruction Note: 1. The cable should be placed between or under bricks. 2. The cables should be set around the studs.(Shown as below) 3. Please pay attention to the direction of the wire socket: the side of the socket with exposed wires should face the welded "="...
- Page 3 Lighting Kits installed in Step 82 Start to paste the warm light strip Take out a warm light strip as shown in the red box below Warn light strip pasted, pull Cover the bricks out cable the arrow...
- Page 4 Light Kits installed in Step 156 Light Kits installed in Step 156 Fix thesocket on the bottom Take out a 350mm dual connector plate as shown cable and a warm light socket Light kits installed in Step 490 Take out another warm light strip Put on the roof, the cable shoud be pulled out as shown...
- Page 5 Start to paste the warm light Warm light strip pasted as shown Start to paste the warm light strip as strip as shown in the red box below shown in the red box below Cover the bricks Arrange the cables as shown...
- Page 6 Light kits installed in Step 493 Take another warm light strip Paste the warm light strip on the bottom plate as shown Link tge cables with the sockets Take out a battery box and a 6-port socket, link them...
- Page 7 Light kits installed in Step 565 Open the roof cover as shown Put the sockets and the cables into the roof Place the battery box here Have a Great Time!
Need help?
Do you have a question about the 16040 and is the answer not in the manual?
Questions and answers