b2 electronic TanDelta TD30 User Manual

Portable measurement system

Hide thumbs

Table Of Contents

Table of Contents

Quick Links

Download this manual

Tan Delta Diagnostics

TD30/TD60/TD90

TD60-MC/TD90-MC/TD120-MC

User Manual

E N G L I S H

DHV0075 Rev06

b2 electronic GmbH

Riedstraße 1

6833 Klaus

AUSTRIA

Tel. +43 (0)5523 57373

Fax + 43 (0)5523 57373-5

www.b2hv.com

info@b2hv.com

Portable TanDelta Measurement System

Subject to alterations-

errors excepted

Illustrations are not binding

Table of Contents

Summary of Contents for b2 electronic TanDelta TD30

Page 1 Tan Delta Diagnostics TD30/TD60/TD90 TD60-MC/TD90-MC/TD120-MC User Manual E N G L I S H DHV0075 Rev06 b2 electronic GmbH Riedstraße 1 6833 Klaus AUSTRIA Tel. +43 (0)5523 57373 Fax + 43 (0)5523 57373-5 www.b2hv.com info@b2hv.com Portable TanDelta Measurement System Subject to alterations-...
Page 3: Table Of Contents
DESIGN AND CONSTRUCTION ..........23 CONNECTION UP TO THE TD / TD-MC INSTRUMENT ..26 SOFTWARE TD CONTROLCENTER ........29 INSTRUMENT CARE ..............51 GLOSSARY AND ABBREVIATIONS ........52 DECLARATION OF CONFORMITY ........53 © b2 electronic gmbh DHV0075 b2 EN...
Page 4: Introduction
• To assure that TD operators are qualified description. technicians • To assure that operators fulfil their responsibilities Safekeeping NOTICE This manual should always be on hand when using the TD test instrument DHV0075 b2 EN © b2 electronic gmbh...
Page 5 Red outlined circle with red diagonal line: Used to indicate forbidden practices. The described handling practice must not be carried out! Blue circle with white exclamation mark: Used to indicate recommended precautionary measures or a situation that can lead to property damage. © b2 electronic gmbh DHV0075 b2 EN...
Page 6 F: +43 (0)5523 57373-5 www.b2hv.com info@b2hv.com Copyright ©2014 b2 electronic GmbH All rights reserved. No part of this publication may be reproduced, transmitted, stored, or translated in hardcopy or electronic form without the written consent of b2. Your opinion matters! Your comments and suggestions are of value.
Page 7 Customer Portal – customers.b2hv.com Register now and get access to a quick and comprehensive support and product data base. The b2 Customer Portal is reserved for b2 electronic customers. Submit the registration and find: • Information about meetings and training sessions •...
Page 8: Safety
Never assume that a piece of equipment that has been high potential tested is safe to handle without using the necessary safety equipment DHV0075 b2 EN © b2 electronic gmbh...
Page 9 These LED lights signals in no way indicate the presence or absence of high voltage and the TD should be considered energized at all times when connected to a potential voltage source like a HVA test system. © b2 electronic gmbh DHV0075 b2 EN...
Page 10 Earth connections must be made first and removed last! • DUT must be discharged and earthed before disconnecting the test lead. • Avoid testing alone. In the event of an emergency another person’s presence may be essential. DHV0075 b2 EN © b2 electronic gmbh...
Page 11 DUT must have clean connections. Test instruments must only be repaired or modified by authorized b2 personnel. NOTICE If required according to local safety regulations Wear high voltage gloves when handling high voltage cables and equipment. © b2 electronic gmbh DHV0075 b2 EN...
Page 12 • Cable jacket / sheath • Other highly Generators capacitive loads • Switchgear • Transformers • Rotating machines • Insulators • Bushings NOTICE Other Applications Before proceeding, contact b2 to validate appropriate use! DHV0075 b2 EN © b2 electronic gmbh...
Page 13 Operator Qualifications TD operators must be qualified electrical technicians! Proof of necessary qualifications for working in high voltage domain is mandatory. It is highly recommended that operators have completed an emergency rescue training program © b2 electronic gmbh DHV0075 b2 EN...
Page 14: General Description
Earth cable, TD Control Center Software, Operating manual Standards EMV: IEC6100-4-2, IEC6100-4-4, EN55077; Safety: EN60950, EN50191, EN61010-1 Environmental Conditions Storage: -25°C to +70°C , Operating: -5°C to +45°C Humidity: max. 80% R.H. (non-condensing) DHV0075 b2 EN © b2 electronic gmbh...
Page 15 Humidity: max. 80% R.H. (non-condensing) Technical Specifications are subject to change. b2 reserves the right to modify values in accordance with future HVA development. in combination with locator set (not in scope of supply) © b2 electronic gmbh DHV0075 b2 EN...
Page 16 Supplied complete with TD communication and analysis software – TD Control Center. • Real-time display of actual output waveform. • Power Save (Sleep) function (1 hour of inactivity), automatic wakeup on reapplication of high voltage. One-Click reconnect in ControlCenter after Sleep DHV0075 b2 EN © b2 electronic gmbh...
Page 17 TD Connecting cable TD - DUT 0,70 m GH0551 TD Connecting cable TD - DUT 1,60 m GH0580 Clamp 600 A red with MC contact 14 mm KDD0016 USB Pen Flash Drive b2 KDG0011 USB Bluetooth Dongle © b2 electronic gmbh DHV0075 b2 EN...
Page 18 MC socket connection for corona shield KMD0081 Corona Shield 2 parts KN0009 Charger 5 LCD M0022 Battery 1,5V Size D Mono Procell VKR0033 TD90-MC transport Case with Inlays TD60-MC transport Case VKR0031 with Inlays; 737x457x349mm DHV0075 b2 EN © b2 electronic gmbh...
Page 19 KEB0002 Extra lid to BX002/1 KEB0003 Akku Ni-MH Baby C 4500mAh Ansmann KEK0027 Measuring lead MFK15/1/100/ KES0022 Clamp Delfin 4mm connector KES0105 Angle Bracket Connector 14mm KES0208 USB Adapter Neutrik NAUSB- W Adapter © b2 electronic gmbh DHV0075 b2 EN...
Page 20 KMD0081 Corona Shield 2 parts KMD0086 HV plug 50 kV Protection KMD0113 TD60 Rack KMD0182 TD Foot base KMD0183 TD Feet upper part KMD0188 TD30 Rack KMK0022 O-Ring 69 x 1,5 mm NBR70 DHV0075 b2 EN © b2 electronic gmbh...
Page 21 0,70 m GH0551 TD Connecting cable TD-charge 1,60 m GH0580 Clamp 600A red with MC contact 14mm M0023 Battery 1,5V Size C Baby Procell VK0014 Transport Box TD 760/255/510mm VK0026 TD30 Kartonage 670/205/500mm Faltschachtel © b2 electronic gmbh DHV0075 b2 EN...
Page 22 3 General Description Art. No. Item Description TD30 TD60 TD90 VKR0005 TD60 Set transport case with Inlays VKR0013 TD30 Set transport case with Inlays VKR0026 TD90 Set transport case with Inlays DHV0075 b2 EN © b2 electronic gmbh...
Page 23: Design And Construction
Device Under Test without a suitable connection to a safe station / earth ground. TD-MC HV Input Input for the high voltage – Connection for the standard HVA test lead (connection to HVA) © b2 electronic gmbh DHV0075 b2 EN...
Page 24 HV output connector • Plug HV test lead into the HV output connector Connection for Guard (leakage current detection and correction) Guard Connection (Accessories for Guard Detection isn’t included in the Standard Accessories) DHV0075 b2 EN © b2 electronic gmbh...
Page 25 LED Test during Startup After Power On and during system startup/wake mode the TD unit performs a LED test to make sure that all of the LED signals work and performs a quick self chec © b2 electronic gmbh DHV0075 b2 EN...
Page 27 • Connect the HVA / TD with the Laptop via Bluetooth • Turn the key switch to the “ON” position. The HVA system automatically boots • Start-up default screen appears “Start Test” screen © b2 electronic gmbh DHV0075 b2 EN...
Page 28 Check that all cables are attached securely. • Connect the HVA/TD with the Laptop via Bluetooth • Turn the key switch to the “ON” position. The HVA system automatically boots • Start-up default screen appears “Start Test” screen DHV0075 b2 EN © b2 electronic gmbh...
Page 29: Software Td Controlcenter
The values of all three phases can be viewed and compared. The diagram is completely auto-scaling and extracts the mean TD value from the most recent voltage block for a particular phase. © b2 electronic gmbh DHV0075 b2 EN...
Page 30 Use these buttons to Load, Save and Print a test report. The Print function can also be used to create PDF document reports if a PDF Writer or a similar PDF Printer Driver is installed. DHV0075 b2 EN © b2 electronic gmbh...
Page 31 Fields stored: Station, Company, Region and Operator Use filename as report title If this box is checked, the report filename will be used as the report title instead of the Cable/Line ID field. © b2 electronic gmbh DHV0075 b2 EN...
Page 32 Use this function to make a copy the currently shown TD diagram into the Windows Clipboard. It can then be easily put into many other applications (like Word, Excel) by selecting Paste in the target program. DHV0075 b2 EN © b2 electronic gmbh...
Page 33 If Bluetooth is already supported you can go directly to Step 3-B Setting up TD Communication (Windows supported). If your system uses a different driver as shown in this manual use the above mentioned parameters to set up Communication. © b2 electronic gmbh DHV0075 b2 EN...
Page 34 Computer” and start Setup.exe in the driver folder. Due to possible technologically changes in drivers and the Windows operating system, certain messages shown below may vary slightly to what you may find on your computer. DHV0075 b2 EN © b2 electronic gmbh...
Page 35 Steps IB1 – IB9 describe how to Install the Bluetooth Software Step Procedure (Installation Bluetooth Software) IB1: Setup Start Driver Setup Start Screen IB2: Accept License Accept License agreement IB3: Choose Destination Choose Driver Software Destination. We suggest to use the defaults. © b2 electronic gmbh DHV0075 b2 EN...
Page 36 Plug the dongle into a free USB port. The windows Hardware Installation will now run and some further information windows will appear. Please wait until the Hardware Detection has finished. This screen will then disappear automatically DHV0075 b2 EN © b2 electronic gmbh...
Page 37 Computer. Other information messages may appear. Please wait until the Installation completes. IB9: Installation Finished Installation of Bluetooth support finished. The above mentioned white on Blue “B”- Bluetooth icon now appears in the system tray. © b2 electronic gmbh DHV0075 b2 EN...
Page 38 Double click on the Bluetooth icon in the system tray or the “My Bluetooth Places” icon on your desktop to bring up the configuration wizard: DHV0075 b2 EN © b2 electronic gmbh...
Page 39 Procedure (Bluetooth Software configuration) CB1: Bluetooth Configuration Initial Bluetooth configuration (only has to be done once) CB2: Computer Title Type in the name and type of your computer. CB3: Configuration starts Start Configuration © b2 electronic gmbh DHV0075 b2 EN...
Page 40 Bluetooth Serial Port Configuration. Leave as suggested. Take note of the serial port number. CB6: Bluetooth Configuration Access Press Skip to tell the system that you will connect to the TD system at a later stage. DHV0075 b2 EN © b2 electronic gmbh...
Page 41 6 Software TD ControlCenter Step Procedure (Bluetooth Software configuration) CB7: Bluetooth Configuration Finished Finished Initial Setup of Bluetooth Support. © b2 electronic gmbh DHV0075 b2 EN...
Page 42 Setup the Communication Port to connect to the TD / TD-MC Start to set up a communication port to the TD system by double-clicking on the “My Bluetooth Places” icon. DHV0075 b2 EN © b2 electronic gmbh...
Page 43 …” to find the TD system VT3: Auswahl TD-Gerät All available Bluetooth devices are listed. TD systems are shown with the last 6 digits of the Serial number. Select the TD unit you want to connect to. © b2 electronic gmbh DHV0075 b2 EN...
Page 44 Check the “TDCommunication” service to use. A message to configure the port will appear. VT6: Bluetooth Properties Leave default setting for this port. Make note of it. You can use either Secure or Unsecured Connection. DHV0075 b2 EN © b2 electronic gmbh...
Page 45 6 Software TD ControlCenter Step Procedure (Connection with a TD-Unit) VT7: Communication Port Setup Successful Setup of communication port! VT8: TD Unit The TD system is now shown as an icon in“My Bluetooth Places” © b2 electronic gmbh DHV0075 b2 EN...
Page 46 Installation finished! The System is now configured and you can start working with the TD ControlCenter. You will use the given COM-Port number to set in the ControlCenter and press the connect button. DHV0075 b2 EN © b2 electronic gmbh...
Page 47 So you maybe have to reduce the distance to get good connectivity. Setup the Communication Port Start to set up and allocate a communication port to the TD system by double- clicking on the Bluetooth icon in the system tray. © b2 electronic gmbh DHV0075 b2 EN...
Page 48 KT3: Select Bluetooth Device All available Bluetooth devices are listed. TD systems are shown with the last 6 digits of the Serial number. Select the TD unit you want to connect to. DHV0075 b2 EN © b2 electronic gmbh...
Page 49 Windows connects to the TD System and installs the relevant drivers. KT6: Finish de Bluetooth Wizard Read the information and note the “outgoing/outbound” COM-Port Number. This number is used by the TD ControlCenter to communicate with the TD unit. © b2 electronic gmbh DHV0075 b2 EN...
Page 50 “welcome” to use as key. KT8: Bluetooth Device is configured The System is now configured. You can start working with the TD ControlCenter. Use the given COM-Port number in the TD ControlCenter and press the connect button. DHV0075 b2 EN © b2 electronic gmbh...
Page 51: Instrument Care
Please always keep an eye on the O-ring (gasket) of the TD unit. It should be lightly greased in in regular intervals. (only the gasket ring!) In the case the ring is brittle you should contact b2 electronic GmbH for a spare one. (KMK0022).
Page 52: Glossary And Abbreviations
(Infinite current flows in a short circuit) To Trip Opening the circuit (no current flows in open circuit) Very Low Frequency • Typically between 0.01 -0.1 Hz DHV0075 b2 EN © b2 electronic gmbh...
Page 53: Declaration Of Conformity
9 Declaration of Conformity Declaration of Conformity The TD units are CE certified and have met the following requirements of the European Council: © b2 electronic gmbh DHV0075 b2 EN...

This manual is also suitable for:

Tandelta td60 Tandelta td90 Tandelta td60-mc Tandelta td90-mc Tandelta td120-mc