Outputs Connections - boXem Arthur 4215/E2 User Manual

Arthur 4215/E2 User Manual
When connecting only one channel of the amplifier, the channel A (6) shall be chosen since it has the
Audiosense functionality allowing to automatically power on and off the amplifier.

Outputs connections

Connect the speaker negative input to the amplifier black binding.
Connect the speaker positive input to the amplifier black and red binding.
Instead of the usual L (left) and R (right) channels, your amplifier references the channels with letters
A and B. Ouput A (5) is the amplified signal from Input A (6). Ouput B (4) is the amplified signal from
Input B (3).
You can connect any output (left or right) from your preamp or DAC to Input A (6) as long as the
corresponding speaker is connected to Output A (5). The same reasoning applies for channel B.
9