Kenwood DPX-302 Instruction Manual
Dual din sized cd receiver
Hide thumbs
Also See for DPX-302:
- Training manual (52 pages) ,
- Instruction manual (44 pages) ,
- Service manual (38 pages)
Table of Contents
Advertisement
DUAL DIN SIZED CD RECEIVER
DPX302
INSTRUCTION MANUAL
Take the time to read through this instruction manual.
Familiarity with installation and operation procedures will help you obtain the best
performance from your new CD-receiver.
For your records
Record the serial number, found on the back of the unit, in the spaces designated on the
warranty card, and in the space provided below. Refer to the model and serial numbers
whenever you call upon your Kenwood dealer for information or service on the product.
Model DPX302 Serial number
US Residence Only
Register your Kenwood product at
www.Kenwoodusa.com
© B64-3614-00/00 (KW)
Register Online
Advertisement
Table of Contents
Related Manuals for Kenwood DPX-302
Summary of Contents for Kenwood DPX-302
-
Page 1: Instruction Manual
Record the serial number, found on the back of the unit, in the spaces designated on the warranty card, and in the space provided below. Refer to the model and serial numbers whenever you call upon your Kenwood dealer for information or service on the product. Model DPX302 Serial number... -
Page 2: Table Of Contents
Contents Safety precautions Notes General features Power Selecting the Source Volume Attenuator System Q Audio Control Audio Setup Speaker Setting Subwoofer Output TEL Mute Switching Display Tuner features Tuning Tuning Mode Direct Access Tuning Station Preset Memory Auto Memory Entry Preset Tuning CD/Audio file/External disc control features... -
Page 3: Safety Precautions
Kenwood disc changers/ CD players released in 1998 or later can be connected to this unit. Refer to the catalog or consult your Kenwood dealer for connectable models of disc changers/ CD players. Note that any Kenwood disc changers/ CD players released in 1997 or earlier and disc changers made by other makers cannot be connected to this unit. -
Page 4: Notes
• If you experience problems during installation, consult your Kenwood dealer. • When you purchase optional accessories, check with your Kenwood dealer to make sure that they work with your model and in your area. • We recommend the use of <Activating Security Code>... - Page 5 Kenwood Corporation 2967-3, ISHIKAWA-MACHI, HACHIOJI-SHI TOKYO, JAPAN KENWOOD CORP. CERTIFIES THIS EQUIPMENT CONFORMS TO DHHS REGULATIONS N0.21 CFR 1040. 10, CHAPTER 1, SUBCHAPTER J. Location : Bottom Panel FCC WARNING This equipment may generate or use radio frequency energy.
-
Page 6: General Features
General features DISP Power Turning ON the Power Press the [SRC] button. Turning OFF the Power Press the [SRC] button for at least 1 second. Selecting the Source Press the [SRC] button. Source required Satellite radio (Optional accessory) Tuner or HD Radio (Optional accessory) External disc (Optional accessory) Auxiliary input* Auxiliary input (Optional accessory) -
Page 7: Attenuator
Attenuator Turning the volume down quickly. Press the [ATT] button. Each time you press the button, the Attenuator turns ON and OFF. When the Attenuator is ON, the "ATT" indicator blinks. System Q Selecting the best sound setting preset for different types of music. -
Page 8: Audio Setup
General features Audio Setup Setting the Sound system, such as Cross over Network. Select the source to adjust Press the [SRC] button. Enter Audio Setup mode Press the [VOL] knob for at least 1 second. Select the Audio Setup item to adjust Press the [VOL] knob. -
Page 9: Tel Mute
TEL Mute The audio system automatically mutes when a call comes in. When a call comes in "CALL" is displayed. The audio system pauses. Listening to the audio during a call Press the [SRC] button. The "CALL" display disappears and the audio system comes back ON. -
Page 10: Tuner Features
Tuner features AUTO/AME Band display ST indicator Tuning Selecting the station. Select tuner source Press the [SRC] button. Select the "TUNER" display. Select the band Push the Control knob towards [FM] or [AM]. Each time you push the knob toward [FM], it switches between the FM1, FM2, and FM3 bands. -
Page 11: Direct Access Tuning
Function of remote control Direct Access Tuning Entering the frequency and tuning. Select the band Press the [FM] or [AM] button. Enter Direct Access Tuning mode Press the [DIRECT] button on the remote control. "– – – –" is displayed. Enter the frequency Press the number buttons on the remote control. -
Page 12: Cd/Audio File/External Disc Control Features
CD/Audio file/External disc control features Track number IN indicator Playing CD & Audio file When a disc is inserted Press the [SRC] button. Select the "CD" display. ⁄ • When a CD is inserted, the "IN" indicator is ON. Pause and play Press the Control knob. -
Page 13: Fast Forwarding And Reversing
Fast Forwarding and Reversing Fast Forwarding Hold down toward [¢] with the Control knob. Release to resume the playback. Reversing Hold down toward [4] with the Control knob. Release to resume the playback. ⁄ • There is no sound while the Audio file is being searched. •... -
Page 14: Scan Play
CD/Audio file/External disc control features Scan Play Playing the first part of each music on the disc or Audio file folder you are listening to and searching for the music you want to hear. Start Scan Play Press the [SCAN] button. "TRAC SCN"/"FILE SCN"/"SCAN ON"... -
Page 15: Hd Radio Control Features
HD Radio control features AUTO/AME Band display ST indicator About HD Radio • When you connect an HD Radio, Tuner features of the unit are disabled and changed to HD Radio tuner features. A portion of the setting methods including the Tuning Mode will change. •... -
Page 16: Menu System
Menu system Menu System Setting beep sound during operation, etc. functions. The Menu system basic operation method is explained here. The reference for the Menu items and their setting content is after this operation explanation. Enter Menu mode Press the [MENU] button for at least 1 second. "MENU"... -
Page 17: Activating Security Code
In Standby mode Activating Security Code Activating the Security Code disables the usage of audio unit by someone else. Once the Security Code is activated, the entry of authorized Security Code is required to turn on the audio unit when it is removed from the vehicle. -
Page 18: Touch Sensor Tone
Menu system In Standby mode Touch Sensor Tone Setting the operation check sound (beep sound) ON/OFF. Display Setting "BEEP ON" Beep is heard. "BEEP OFF" Beep canceled. In Standby mode Manual Clock Adjustment Select Clock Adjustment mode Push the Control knob towards up or down. Select the "CLK ADJ"... -
Page 19: Supreme Setting
In Audio file source Supreme Setting When AAC, MP3 or WMA files encoded at a low bit rate (less than 96kbps (fs=44.1k, 48kHz)) are played, this function restores their high frequency region to approach the sound quality of equivalents of these files encoded at a high bit rate. -
Page 20: Auxiliary Input Display Setting
Menu system Auxiliary Input Display Setting Selecting the display when changing to Auxiliary input source. Select Auxiliary input source Press the [SRC] button. Select the "AUX"/ "AUX EXT" display. Enter Menu mode Press the [MENU] button for at least 1 second. "MENU"... -
Page 21: Demonstration Mode Setting
In Standby mode Demonstration mode Setting Sets the demonstration mode. Select the Demonstration mode Push the Control knob towards up or down. Select the "DEMO" display. Set the Demonstration mode Press the Control knob for at least 2 seconds. Each time you press the knob at least 2 seconds, the Demonstration mode alternates between the settings shown in the table below. -
Page 22: Basic Operations Of Remote Control
When the button is pressed again, the volume returns to the previous level. DIRECT : This button is used when Kenwood Bluetooth HANDS FREE BOX is connected. For more information, refer to the instruction manual of Bluetooth HANDS FREE BOX. -
Page 23: In Tuner Source
Audio Control [AUD] button Selects the Audio item to be adjusted. [VOL] buttons Adjusts the Audio item. ⁄ • Refer to <Audio Control> (page 7) for the operation method, such as the procedures for Audio control and others operations. In Tuner source [FM]/ [AM] buttons Selects the band. -
Page 24: Accessories/ Installation Procedure
Accessories/ Installation Procedure Accessories English Installation Procedure 1. To prevent a short circuit, remove the key from the ignition and disconnect the - battery. 2. Make the proper input and output wire connections for each unit..1 3. Connect the speaker wires of the wiring harness. 4. -
Page 25: Connecting Wires To Terminals
To front right Gray speaker Green/Black To rear left Green speaker Purple/Black To rear right Purple speaker Car fuse box To connect the Kenwood navigation system, consult your navigation manual. Ignition key switch Car fuse box (Main fuse) – Battery English... -
Page 26: Installing The Escutcheon
Installing the Escutcheon For General Motors Refer to the section <Removing the Hard Rubber Frame> (page 28) and then remove the hard rubber frame. Cut out accessory 2 to meet the shape of the opening of the center console. Attach accessory 2 to the unit. For TOYOTA/ SCION Refer to the section <Removing the Hard Rubber Frame>... -
Page 27: Installation
Installation Installing the Unit Firewall or metal support Screw (M4X8) (commercially available) Self-tapping screw (commercially available) Installing in Japanese-Made Cars and General Motors Cars Install onto the car bracket using the supplied screws (M5 × 6 mm, M5 × 7 mm). The holes of the car bracket to use will differ depending on the car model. -
Page 28: Removing The Unit
Removing the Unit Removing the Hard Rubber Frame (escutcheon) Engage the catch pins on the removal tool 7 and remove the two locks on the lower level. Lower the frame and pull it forward as shown in the figure. When the lower level is removed, remove the upper two locations. -
Page 29: Troubleshooting Guide
Troubleshooting Guide Some functions of this unit may be disabled by some settings made on this unit. Cannot switch to Aux source. AUX is not turned on. ☞ <Built-in Auxiliary input Setting> (page 20) • Cannot set up the subwoofer. •... - Page 30 Troubleshooting Guide The messages shown below display your systems condition. EJECT: • No disc magazine has been loaded in the changer. The disc magazine is not completely loaded. • No CD in the unit. NO DISC: No disc has been loaded in the disc magazine.
-
Page 31: Specifications
Specifications Specifications Specifications subject to change without notice. FM tuner section Frequency range (200 kHz space) : 87.9 MHz – 107.9 MHz Usable sensitivity (S/N = 30dB) : 9.3dBf (0.8 μV/75 Ω) Quieting Sensitivity (S/N = 50dB) : 15.2dBf (1.6 μV/75 Ω) Frequency response (±3.0dB) : 30 Hz –...