Download Print this page

Operation - Wellcare FE-5835BK User Manual

Rotating vibration dumbbell

Advertisement

Operation

Charging the device
• Connect the supplied charging adaptor to the charging port
on the device and the other end to a wall plug.
• The speed/intensity indicators will flash blue at M1, M2, M3
respectively when charging. All indicators will turn on once
fully charged.
• Note: charging time is approximately 3 hours.
Using the device
• Press the Power/Function button to turn the device on. Press
repeatedly to change the vibration speed/intensity. There are
3 built-in speed modes + auto mode. Press again to turn the
device off.
• Place the device on the desired body part to massage and roll
the device around.
• Note: the device will automatically turn off after 15 minutes.
Hips
Arm
Only use device:
- On a dry surface of the body, over clothing, by lightly pressing and
moving across the body for approximately 60 seconds per region
- On the body's soft tissue, as desired, without producing pain or
discomfort — do not use on the head or bony area of the body.
- Bruising can occur regardless of the control setting or pressure applied.
Check treated areas frequently and immediately stop using the device at
the first sign of pain or discomfort.
12
Waist
Thigh
Back
Heel

Advertisement

loading

This manual is also suitable for:

Fe-5835bu