Page 1
TECHNICAL SUPPORT: Operating instructions and warnings 707-448-5151 must be read and understood by all operators and users. JOETAP MODEL: ULINE COOLER MODEL: • Four taps/Four different beverages • Independent Nitrogen Infusion Control for each tap •...
Page 2
Relieve any static pressure in the product keg by lifting the ring on the pressure relief valve. Once drained of pressure, lift the locking mechanism of the tank lid and press downward on the lid to push it inside the tank. Twist the lid sideways and tilt it slightly to remove the lid from the tank.
Page 3
Relieve any static pressure in the product keg by lifting the ring on the pressure relief valve. Once drained of pressure, lift the locking mechanism of the tank lid and press downward on the lid to push it inside the tank. Twist the lid sideways and tilt it slightly to remove the lid from the tank.
Page 4
VERIFY THAT THE NITROGEN GENERATOR IS PLUGGED IN AND THE POWER SWITCH IS IN THE ‘ON’ POSITION. NO PRODUCT POUR NO NITROGEN PRESSURE IF A GAS CYLINDER IS BEING USED, VERIFY SUFFICIENT ALL FAUCETS PRESSURE WITHIN THE TANK BY CHECKING THE PRESSURE GAUGE ON THE OUTPUT REGULATOR.
Need help?
Do you have a question about the JT-NIT-RTD-444 and is the answer not in the manual?
Questions and answers