Summary of Contents for Moosoo YS60Y-L-P
- Page 7 Select the program and choose the desire time and pressure then wait 10s, the pressure cooker will start automatically.
- Page 9 Auto pressure release display (sample) Pressure release indicator: on or flash when pressure is releasing. Press “Venting” button during the program will enable auto pressure release once the program entered cooking and keep warm process.
- Page 11 Press “+” and “-” to adjust time to 2 minutes. Wait 10s the program will automatically start.
- Page 12 Wait for 10s, after 3 beeps and the program will automatically start.
- Page 13 Select the Saute function and wait for 10s to start. Press “+” and “-”...
- Page 14 (AUTOMATIC)
- Page 15 (MANUAL) To adjust cooking time, press “+” or “-” for 1min increments or decrements. Press “Hour/Minutes” to switch between minutes or hours adjustment. The time can step up or down faster when you holding the button.
- Page 16 DELAY Set desired amount of time for the Delay delay, press “+” and “-” to adjust time. CANCEL Keep Warm /Cancel If disabled the venting function, Enable or disable the automatic pressure Venting press the button for 2s, release during the programing. continuous pressure release start after 3 beeps.
- Page 18 (208...
- Page 22 ERROR CODE POSSIBLE CAUSE(S) HOW DO I RESLOVE THE ISSUE? Bottom temperature sensor open Err1 Contact customer support. circuit protection Bottom temperature sensor short Err2 Contact customer support. circuit protection The temperature is too high;inner pot is not properly positioned or not in the Place the inner pot properly in the base.
Need help?
Do you have a question about the YS60Y-L-P and is the answer not in the manual?
Questions and answers
How do I find a manual that matches the controls on the front of my MooSoo cooker?