Hear+Hi Acuity ITC Quick Start Manual

Acuity ITC
Digital Hearing
Amplifier Earphones
WELCOME
Congratulations and thank you for choosing the
Stereo Assistive Hearing Amplified Headset! You've made an excellent
decision and you will enjoy using this product for many years to come!
This guide will help you get started and show you all the great features, so
that you get the most out of your investment.
QUESTIONS? VISIT Hear+Hi.com/support
EMAIL US AT info@Hear+Hi.com
FEATURES
• In-The-Canal
• Discreet and Invisible
Hearing Aid Speaker
Volume
Adjustment Dial
OPERATNG INSTRUCTIONS
*Note: Prior to using your hearing aid, make sure that the unit is fully
charged.
Step 1: Switch ON the aid
by turning the
volume adjustment
dial clockwise.
Step 2: Make sure the eartip is securely attached to the hearing aid.
Step 3: Use your finger to cover the microphone, then gently
insert the hearing aid inside your ear.
Step 4 : Use the volume adjustment dial to adjust the level so that it's
comfortable. Rotate clockwise to increase the volume and
counter-clock wise to reduce it.
Hear+Hi Acuity Wireless
OR
• Rechargeable over AC & Battery
• Charging Case with Night LED
Earbud
Microphone
LOW
(OFF)
HIGH
(ON)
NOTE:
Not for users under 18 years of age.
Always consult your hearing healthcare professional for any hearing
loss conditions.
Any serious hearing conditions should be examined and diagnosed by
a licensed physician (preferably an ear specialist).
ACCESSORIES
Charging Case x 1
Hearing Aid x 2
Earbuds (Tiny*2, Small*2,
Medium*2, Large*2)
Cleaning Brush x 1
AC Adapter
DESCRIPTION
Charging Case
Cleaning Brush
Night Light
Charging Status Indicator
CHARGING INSTRUCTIONS
There are two different methods to charge the hearing aid:
Charging by Battery or by AC Adapter
Step 1: Make sure the hearing aid is switched ON (Check volume
adjustment dial is not set in the Low / Off position)
Step 2: Place the hearing aid vertically
on the charging slot as shown.
Step 3: Gently insert the hearing aid by guiding it into the charging case
as shown.
Step 4: Insert AAA batteries or plug in
the AC Adapter.
Step 5: Ensure that the night light is ON and that the hearing aid is
securely placed in the charging case. Check the status indicator
lights to confirm that the hearing aid is charging properly. Close
the charging case cover to protect the hearing aid from dust and
damage.
Battery / AC Power
Indicator
AC Adaptor Input
Charging Slot