Patlite PATLEDS CLF10-24 Series Installation Manual page 2

LED Work Light
INSTALLATION MANUAL
TYPE : CLF
Thank you for specifying the LED Work Light
Please read these instructions carefully before you perform installation,
maintenance and repair. Store this manual carefully for easy reference.
If you have any questions about this product, please contact PATLITE Corporation.
NOTES TO BE OBSERVED FOR SAFE OPERATION
In order to prevent any damage to the user and other personnel or to
assets, note the following:
■ The indications for warning are divided into the following classes
according to the degree of danger or damage incurred when the warning
is not taken into consideration and the product is not correctly used.
Indicates an imminently dangerous condition: failure to
Warning
follow the instructions may lead to death or serious injury.
Indicates a potentially dangerous condition: failure to follow
Caution
the instructions may lead to slight injury or property damage.
1. To operate this product safely, please observe the following
Warning
Make sure the power is off before wiring, mounting, repairing, or replacing parts to
●
avoid a short-circuit, electric shock, or burn.
If installing this product requires construction work, please ask a specialist in order
●
to avoid electric shock, fire, or personal injury.
When this product is used for security purposes, it should be inspected daily. In
●
case a malfunction should occur, it is recommended that you use this product
together with other security products.
Do not use this product to support your weight while climbing onto a machine. Mount
●
the product so that it is clear of any moving parts - such as a machine cover.
In order to avoid danger to eyes, do not stare into beam, do not view directly with
●
optical instrument, and do not turn LED beam to someone's.
Caution
Make sure of the specified operating voltage.
●
For safety, make sure to connect an external fuse to the power source as shown
●
in the wiring example.
2. Model No. configuration
C L F □ □ - 2 4 -
■ Length of Light-emitting part ■ Rated voltage
10 : 100mm 24 : 24V DC
20 : 200mm
3. Part Names and Dimensions
■Dimension
Nameplate
for your application.
Nameplate
Installing part
■Mounting hole template
●CLF10-24 120
Nameplate
4. Installation
Warning
Make sure the power is off before installing to avoid a short-circuit, electric shock,
●
or burn.
Caution
In installing, use extra care to protect it from falling down.
●
This product can be used only indoors. (Do not use it outdoors.)
●
■ Mounting method
Use M4 bolts and nuts to install the product. ( Recommended torque : 2N・m) .
●
And the installation surface should have sufficient strength.
Use washers attached with the product to maintain the water proof protection.
●
3mm thick waterproof packing is attached at the bottom of the product.
●
However, in case the installation surface is not flat, please seal up the product and
installation surface with waterproof sealant to maintain the waterproof protection.
5. Wiring
Warning
Make sure the power is off before wiring to avoid a short-circuit, electric shock, or
●
burn.
Caution
□
For safety, make sure to connect an external fuse to the power source as shown
●
in the wiring example.
Make sure of the specified operating voltage.
●
Do not pull out the cable or push it into the body. And please slack the cable so
●
■ Color of LED
as not to be stressed.
C : White
Orange lead wire should be grounded to protect from static electricity, thunder
●
R : Red
and so on.
Y : Amber
A
cover
A
CLF10-24- 130
□
CLF20-24-□ 230
case
Waterproof packing
B Cable exit
420 from exit
5
150
Power supply cable
(Unit : mm)
●CLF20-24 220
Nameplate
50
※1 In the case of the attached nut : Φ4.5
■ Wiring example
B
120
【Fuse(Recommendation)】
220
Voltage 125V
Current 1A
6. Specifications
CLF10-24-□
Model
Rated voltage
White
Power
Red 2.5 W
consumption
Amber
850 lx
White
Illuminance
Red 240 lx
（at 50cm）
320 lx
Amber
Material Body : Aluminum Cover : Polycarbonate
Mounting direction
Mounting place
Operating
-30℃ ～ +60℃ (Without dew condensation)
temperature range
Protection rating
Vibration proof
Mass 205 g
* There may occur variations in the color inherent to the properties of the LED.
Caution
PATLITE Corporation disclaims all liability for any malfunction or damage
●
occurring as a result of handling contrary to the instructions, cautions and
warnings mentioned in this manual.
Specifications may change without notice due to continual product improvement.
●
【Cable】
UL2464(AWG26/3core)
power supply
Gray
24V DC
White
(non-polar)
Fuse
Orange Earth connected to case of aluminum.
CLF20-24-□
24V DC （non-polar）
5.0 W
1700 lx
470 lx
630 lx
All direction
Indoors only
IP67
19.6 m/s
2
345 g
6196-A
'08.01.NHI