Table of Contents
Advertisement
SAFETY WARNINGS COMMON FOR CUTTING OPERATIONS:
This power tool is intended for cutting, Read all safety warnings,
a)
instructions, illustrations, and specifications provided with this tool.
Failure to follow all instructions listed below may result in electric shock,
fire and/or serious injury
Do not use accessories which are not specifically designed and
b)
recommended by the tool manufacturer. Just because the accessory
can be attached to your power tool, it does not assure safe operation.
The rated speed of the accessory must be at least equal to the
c)
maximum speed marked on the power tool. Accessories running faster
than their rated speed can break and fly apart.
The outside diameter and the thickness of your accessory must be
d)
within the capacity rating of your power tool. Incorrectly sized
accessories cannot be adequately guarded or controlled.
Wear personal protective equipment. Depending on application, use
e)
face shield, safety goggles or safety glasses. As appropriate, wear dust
mask, hearing protectors, gloves and workshop apron capable of
stopping small abrasive or workpiece fragments. The eye protection
must be capable of stopping flying debris generated by various
operations. The dust mask or respirator must be capable of filtrating
particles generated by your operation. Prolonged exposure to high
intensity noise may cause hearing loss.
Keep bystanders a safe distance away from work area. Anyone
f)
entering the work area must wear personal protective equipment.
Fragments of workpiece or of a broken accessory may fly away and
cause injury beyond immediate area of operation.
Hold the power tool by insulated gripping surfaces only, when
g)
performing an operation where the cutting accessory may contact
hidden wiring or its own cord. Cutting accessory contacting a "live" wire
may make exposed metal parts of the power tool "live" and could give
the operator an electric shock.
6
Advertisement
Table of Contents
