Operation - AEG ABL18F Original Instructions Manual

While operating the product, always wear substantial footwear and
long trousers. Do not operate the product when barefoot or wearing
open sandals. Avoid wearing clothing with loose fitting or that has
hanging cords or ties.
Do not wear loose clothing or jewellery that can be drawn into the
air inlet. Secure long hair so it is above shoulder level to prevent
entanglement in moving parts.
Before each use, ensure that all controls and safety devices function
correctly. Do not use the product if the off switch does not stop
the product.
Operate the product in the recommended position and only on a
firm and level surface.
Do not operate the product on a paved or gravel surface where
ejected material could cause injury.
Before each use, always inspect the housing for damage. Ensure
that guards and handles are in place and properly secured. Replace
worn or damaged components in sets to preserve balance. Replace
damaged or unreadable labels.
Never operate the product while people, especially children, or pets
are nearby.
Keep all cooling air inlets clear of debris.
Use rakes and brooms to loosen debris before blowing.
Clear the work area before each use. Remove all objects such
as rocks, broken glass, nails, wire, or string that can be blown a
considerable distance by high velocity air.
Injuries may be caused or aggravated by prolonged use of the
product. When using the product for prolonged periods, ensure you
take regular breaks.
BATTERY TOOL USE AND CARE
Some regions have regulations that restrict the use of the product
to some operations. Check with your local authority for advice.
Wear hearing protection at all times whilst operating the product.
This will prevent exposure to noise that could cause a permanent
hearing injury. Protection such as ear plugs can limit your exposure
and reduce noise.
Wear full eye protection at all times while operating the product.
Wear a full face mask or fully enclosed goggles. Normal spectacles
or sunglasses are not adequate protection. Objects can be thrown
at high speed by the powerful air jet at any time and may rebound
from hard surfaces toward the operator.
While operating the product, always wear substantial footwear and
long trousers. Do not operate the product when barefoot or wearing
open sandals. Avoid wearing clothing with loose fitting or that has
hanging cords or ties.
Do not wear loose clothing or jewellery that can be drawn into the
air inlet. Secure long hair so it is above shoulder level to prevent
entanglement in moving parts.
Before each use, ensure that all controls and safety devices function
correctly. Do not use the product if the off switch does not stop
the product.
Operate the product in the recommended position and only on a
firm and level surface.
18
Do not operate the product on a paved or gravel surface where
ejected material could cause injury.
Before each use, always inspect the housing for damage. Ensure
that guards and handles are in place and properly secured. Replace
worn or damaged components in sets to preserve balance. Replace
damaged or unreadable labels.
Never operate the product while people, especially children, or pets
are nearby.
Keep all cooling air inlets clear of debris.
Use rakes and brooms to loosen debris before blowing.
Clear the work area before each use. Remove all objects such
as rocks, broken glass, nails, wire, or string that can be blown a
considerable distance by high velocity air.
Injuries may be caused or aggravated by prolonged use of a tool.
When using any tool for prolonged periods, ensure you take regular
breaks.

OPERATION

Operate the product only at reasonable hours—not early in the
morning or late at night when people might be disturbed.
Never operate the product in an explosive atmosphere.
Avoid using the product in bad weather conditions, especially when
there is a risk of lightning.
Keep bystanders, children, and pets 15 m away from the area of
operation. Turn off the product if anyone enters the area.
Do not operate the product in poor lighting. The operator requires a
clear view of the work area to identify potential hazards.
Operating similar tools nearby increases both the risk of hearing
injury and the potential for other persons to enter your working
area.
Always be sure of your footing on slopes. Walk, never run.
Keep proper footing and balance. Do not overreach. Overreaching
can result in loss of balance.
Never use the product with defective guards or shields, or without
safety devices in place.
To reduce the risk of injury associated with contacting rotating
parts, always turn off the product and remove the battery pack.
Make sure that all moving parts have come to a complete stop:
■
before leaving the product unattended
■
before clearing blockages
■
before checking, cleaning, or working on the product
■
before inspecting the product after striking a foreign object
■
whenever the product starts to vibrate abnormally (inspect
immediately)
Immediately turn off the product and remove the battery pack in
the event of accident or breakdown. Do not operate the product
again until it has been fully checked by an authorised service centre.
Do not modify the product in any way or use parts and accessories
that are not recommended by the manufacturer.
If the product is dropped, suffers heavy impact, or begins to vibrate
abnormally, immediately turn off the product and inspect for
18