Hyundai H-1417 Instruction Manual page 5

Instruction manual
Compact disc operations
• Set FUNCTION switch to CD position.
• Open the CD door by lifting the
handle on the CD compartment. Put a CD
into the CD compartment with the label
side upwards and close the CD door by
pushing the handle.
Play/pause mode
• Press button to start play.
• Press button to pause at any
track when playing.
• To stop the CD, press
• To remove the CD from the unit open
the CD door.
• Always press button before
opening the CD compartment.
• To turn off the CD player set
FUNCTION switch to TAPE (OFF) position.
• For MP3 discs: in stop mode, you
can press button to select your desired
album followed by
albums in a MP3 disc only).
Skip and search mode
During playback you can use
go to previous or next track.
• If you have selected a track number
in the stop or pause position, press
start playback.
• Press button once briefly for the
next track, or press repeatedly until the
needed track number is displayed.
• Press button once briefly to return
to the beginning of a current track.
• Press button more than once
briefly for a previous track.
Fast backward/ forward playback
Press and hold /
4
button.
button (for multiple
/ to
to
buttons to start
fast backward or forward playback until
you find the passage to play from.
Play mode
While playing Audio CD:
• Press PLAY MODE button once for
single track repeat playing.
• Press PLAY MODE button twice for
all tracks repeat playing.
• Press PLAY MODE three times for
playing randomly.
• Press PLAY MODE four times for
normal playing.
While playing MP3:
• Press PLAY MODE button once for
single track repeat playing.
• Press PLAY MODE twice for track
inside the album repeat playing.
• Press PLAY MODE three times for all
tracks repeat playing.
• Press PLAY MODE four times for
playing randomly.
• Press PLAY MODE five times for
normal playing.
Program mode
Up to 20 tracks can be programmed for
disc play in any order or the same track
can be repeated up to 20 times. Before
use, press button.
• Press PROGRAM button.
• Select a desired track by using
buttons.
• Press PROGRAM button to confirm.
• Repeat steps described above
to enter additional memories into the
program if necessary.
• When all the desired tracks have
been programmed, press
to play the disc in the order you have
programmed.
You can erase the contents of the
/
button