Summary of Contents for Atosa EBF-03
- Page 1 Original instruction INSTRUCTION MANUAL Blast Chiller Cabinets Please read the user’s manual before you use this product...
-
Page 3: Table Of Contents
Blast Chiller Cabinets Installation, use and maintenance instructions INTRODUCTION................................2 The manufacturer cannot be held liable in the following cases:................3 TRANSPORTATION AND STORAGE..........................3 COMMISSIONING................................4 POSITIONING................................4 INITIAL CLEANING............................... 5 Electrical connection............................. 5 CONNECTION TO DRAINS..........................6 TECHNICAL CHARACTERISTICS..........................6 NOISE AND VIBRATION............................6 POSSIBLE USAGES............................ -
Page 4: Introduction
1. INTRODUCTION Please read instructions before using this appliance. IMPORTANT SAFETY INSTRUCTION ▲ To reduce the risk of fire, electric shock, or injury to persons when using your product, basic safety precautions should be followed, including the following. ▲ This appliance must be properly installed and located in accordance with the Installation Instruction before it is used. -
Page 5: The Manufacturer Cannot Be Held Liable In The Following Cases
This instruction manual provides all the necessary information regarding: ▲ use of the refrigerator ▲ technical specifications ▲ installation and handling ▲ operator procedures and instructions ▲ maintenance operation The manual is to be considered an integral part of the refrigerator and should be stored in a safe place for father consult to permit a good working life of the refrigerator. -
Page 6: Commissioning
4. COMMISSIONING Carefully read the label on the equipment, do not cover for any reason whatsoever. and replace them immediately if damaged. Do not remove protection or panelling that require the usage of tools. 4.1 POSITIONING Ensure that in respect of the dimensions, the space reserved for the equipment permits its correct utilisation and ease of maintenance. -
Page 7: Initial Cleaning
4.2 INITIAL CLEANING Before use all parts of the cabinet should be cleaned, For the walls and all the internal parts use an antibacterial detergent. For the plastic parts use a moistened cloth.Dry with a soft clean cloth.use little or no water. Do not use harsh or abrasive solvents or detergents During cleaning do not approach bare-handed those parts which could cut (evaporator, condenser, etc.) and always use protective gloves. -
Page 8: Connection To Drains
4.4 CONNECTION TO DRAINS The dispersal of defrost water is automatic in all models with integral condensing unit. 5. TECHNICAL CHARACTERISTICS 5.1 NOISE AND VIBRATION The sound level of the equipment fitted with integral hermetic condensing unit does not exceed 70 dB,it is therefore not necessary to provide sound insulation. -
Page 9: Usage
6. USAGE 6.1 ACTION These devices are activated by one switches and an electronic control panel. 6.2 Meaning of the button... -
Page 10: Selecting The Blast Chilling Cycle
6.3 Selecting the BLAST CHILLING cycle... -
Page 11: How To Access And Set Parameters
6.4 How to access and set parameters type “F” (FREQUENT, not protected by password), type “C” (CONFIGURATION, password protected) Step Action Effect Meaning Press PRG for 3 seconds After 3 seconds the display will show the 1st Access to type ”F” parameters is parameter, “0”(Password) direct without password Press UP or DOWN... -
Page 12: Accessing The Parameters Divided By Functional Blocks
6.5 Accessing the parameters divided by functional blocks Once having accessed the type “F” or “C” parameters (see tables above) Step Action Effect Meaning Press PRG The display will show the name of the functional Example ‘CMP’ for the compressor block that the parameter belongs to parameters, ‘dEF’... -
Page 13: Procedure For Setting The Default Parameter Values
“HF” alarm = power failure lasting over a minute and exceeded AH maximum threshold: up to three HF events are saved (HF, HF1, HF2) respectively from the more recent (HF) to the oldest (HF2) and a HFn signal that displays the number of occurred HF events. HA/HF alarm setting: AH parameter (high temp. threshold);... -
Page 14: Trouble Shooting And Remedies
8. TROUBLE SHOOTING AND REMEDIES Often, the malfunction of a unit is due to simple causes which can easily be eliminated without contacting a technician.Therefore execute the following controls 8.1 If the cabinet does not operate, make sure that: The plug has been correctly inserted into the socket. The supply cord is not damaged. - Page 15 authorities, and observing local statutes.Polyurethane foaming material, not fire-resistant, when deal with the material, should be according with local law and statue. The cabinet consists of: Structure in steel plate, Electrical components and cables, Electrical compressor. Plastic materials, Refrigerant fluid which must not be discharged into the atmosphere. ALL THE RESPONSIBILITY FOR THE FAILURE TO RESPECT THE EXISTING LOCAL STATUTES ARE THE RESPONSIBILITY OF THE OWER.
-
Page 16: Circuit Diagram
Circuit diagram... -
Page 17: Technical Parameters
Technical Parameters Model EBF-03 EBF-05 Fast cooling performance per cycle/kg 10Kg(+90℃/+3℃) in 90 Min 25Kg(+90℃/+3℃) in 90 Min Fast freezing performance per cycle/kg 5Kg(+90℃/-18℃) in 240 Min 15Kg(+90℃/-18℃) in 240 Min Rated voltage 220-240V,50Hz 220-240V,50Hz Rated power(W) 1100 1300 Current(A) -
Page 18: Official Approval And Rules
Model(s): EBF-05 Type of product Blast chiller / Blast freezer Refrigerant fluid(s): R290 (Propane), GWP: 3 Indication of the program used for blast chilling Indication of the program used for blast freezing Item Symbol Value Unit Energy consumption for chilling function 0,0576 kWh /kg Chilled full load capacity... -
Page 19: Summary Of Operating Parameters
Summary of operating parameters Signals on the display... -
Page 20: Correct Disposal Of This Product
CORRECT DISPOSAL OF THIS PRODUCT This marking indicates that this product should not be disposed with other household wastes throughout the EU. To prevent possible harm to the environment or human health from uncontrolled waste disposal, recycle it responsibly to promote the sustainable reuse of material resources. To return your used device, please use the return and collection systems or contact the retailer where the product was purchased.
Need help?
Do you have a question about the EBF-03 and is the answer not in the manual?
Questions and answers