Summary of Contents for Agit Wavestorm Junior Stand-Up Paddle Board
Page 2
(waves) or when there are no waves at all. AGIT Global’s Junior SUP is designed for beginners to advanced SUP’ers alike. Our board dimensions provide good stability on water. The foam construction of the board, with its 3 Stringer design is very strong yet light-weight and is easy to transport. There is a Built-In Handle near the center of the topdeck to help carry the board.
Page 3
Store your board away from direct for more information or visit www. sunlight, in a cool, dry location. agit-global.com If your board has a hole or scratch in RECOMMEND USER WEIGHT LIMIT NOT the foam surface, you can purchase any TO EXCEED 120 LBS.
Page 4
Screw Metal Plate First remove the protective tape, Alternate Insertion: then remove the screw from the Slowly slide fin into fin box from metal plate. the top. Screw Insert the screw into the fin. Insert Fin into fin box by inserting Slide Fin backwards into position, stainless steel pin of Fin into the as shown above.
Page 5
Screw Metal Plate Push Fin down, as shown above. Attach Fin to metal plate with screw, When putting the fin in for flat as shown above. Then tighten water use, you can put the fin screw. DO NOT OVER TIGHTEN. forward.
Page 6
Pull Leg Leash Rope through eyelet as shown Pull leg cuff through Leg Leash Rope as above and below. shown above. Pull Leg Leash Rope tight. Installation complete.
Page 7
6”-12” Click! Determine desired Paddle length. Most riders There will be a clicking sound when Locking Pin Pull Paddle Handle upward to extend shaft prefer Paddle length to be 6-12 inches taller is securely fitted into desired hole. length to desired height. than the top of their head.
Page 8
CONTACT CUSTOMER SERVICE IF YOU HAVE ANY QUESTIONS 1-877-673-3622 AGIT GLOBAL NORTH AMERICA, INC. 14460 Myford Rd, Irvine Ca 92606...
Need help?
Do you have a question about the Wavestorm Junior Stand-Up Paddle Board and is the answer not in the manual?
Questions and answers