Advertisement
Quick Links
Pos.
Dispense Head
1.1
Dispense Head Body
1.2
Handle
1.3
Gas-Adapter
1.4
Probe
Read the operating instructions carefully and keep them in a safe place.
S- & D-Type / EN
Pos.
Tap
2.1
Automatic Stop
2.2
Tap Body
2.3
Handle assembly
2.4
Compensator lever
2.5
Valve shaft
2.6
Compensator
2.7
Shank with knurled nut
Pos.
Plug-in Coupling
3.1
Gas line with connection
3.2
Plug-in
Seite 1/4
Version-5
Pos.
Pressure reducer
4
Pressure reducer
Advertisement
Summary of Contents for Aalberts DSI DRAFT 2 GO S
- Page 1 S- & D-Type / EN Seite 1/4 Version-5 Pos. Dispense Head Pos. Pos. Plug-in Coupling Pos. Pressure reducer Dispense Head Body Automatic Stop Gas line with connection Pressure reducer Handle Tap Body Plug-in Gas-Adapter Handle assembly Probe Compensator lever Valve shaft Compensator Shank with knurled nut Read the operating instructions carefully and keep them in a safe place.
- Page 2 S- & D-Type / EN Seite 2/4 Version-5 Draft2Go S- & D-Type/ Well & Draft Dispensing Unit from DSI for Schäfer-Kegs General The dispensing unit offers a compact and simple solution for mobile dispensing from a keg. For this purpose, the suitable dispensing head is installed with an already preset pressure reducer incl.
- Page 3 S- & D-Type / EN Seite 3/4 Version-5 To do this, simply operate the tap (2) on the handle. This has an automatic return to the closed position. To set the desired flow rate or to minimize foaming in the event of temperature fluctuations, you can operate the small lever on the side of the tap (2) and thus select your optimum setting.
- Page 4 S- & D-Type / EN Seite 4/4 Version-5 Basic cleaning / Service For basic cleaning or repair (see Service Kit under Spare parts), please refer to other helpful instructions, which you can find at our below QR-Codes. Otherwise, the tap (2) can be disassembled into its individual parts quite easily by removing the automatic stop, the handle and the side adjustment lever for the purpose of detailed cleaning.