1. Manuals
  2. Brands
  3. LYSON Manuals
  4. Label Maker
  5. W4086
  6. Manual

LYSON W4086 Manual

Hide thumbs
Table of Contents

Advertisement

Quick Links

Download this manual
MANUAL
LABELLING MACHINE
Przedsiębiorstwo Pszczelarskie Tomasz Łysoń
Spółka z o.o. Spółka Komandytowa
34-125 Sułkowice, ul. Racławicka 162, Polska
www.lyson.com.pl, email; lyson@lyson.com.pl
tel. 33/875-99-40, 33/870-64-02
Siedziba Firmy Klecza Dolna 148, 34-124 Klecza Górna
The following manual includes the device bearing the following code:
W4086
1. General safety operational principles for the labelling machine
1.1. Electrical safety
1.2. Operational safety
2. Characteristics of the jar labelling machine
2.1. Technical data of the labelling machine
2.2. Connecting the labelling machine to honey bottling line
2.3. Placing the labels
2.4. Setting the labelling machine with regards to the required jar size
2.4.1. Checking the settings of an induction sensor
2.4.2. Checking the label setting with regards to the required jar size
2.4.3. Mounting a New roll with labels
3. Description of the Mitsubishi GOT1000 controller
3.1. Controller set-ups
4. Storing the jar labelling machine
5. Cleaning and maintenance
6. Recycling
7. Guarantee

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the W4086 and is the answer not in the manual?

Questions and answers

Summary of Contents for LYSON W4086

  • Page 1 LABELLING MACHINE Przedsiębiorstwo Pszczelarskie Tomasz Łysoń Spółka z o.o. Spółka Komandytowa 34-125 Sułkowice, ul. Racławicka 162, Polska www.lyson.com.pl, email; lyson@lyson.com.pl tel. 33/875-99-40, 33/870-64-02 Siedziba Firmy Klecza Dolna 148, 34-124 Klecza Górna The following manual includes the device bearing the following code: W4086 1.

  • Page 2: Electrical Safety

    Prior to operating the device please refer to the manual and act according to the guidelines contained therein. The manufacturer cannot be held accountable for the damages cause by misusing the device or its improper handling 1. ELECTRICAL SAFETY • The device must be plugged in to the socket with the voltage specified on the product nominal plate Electric installation must be equipped with RCD having the nominal activation current below...
  • Page 3 Photo no 1. Labelling machine 2.1. Technical data of the labelling machine: Jar transporter with adjustable speed • Side guides with regulated spacing • Stainless steel label guides – 4 pcs. • Aluminium-polyurethane guides with bearings – 4 pcs. • Step motor driving label feeder •...
  • Page 4 Photo nor 2. Ramp of the labelling machine Having completed the aforementioned action, connect the labelling machine to 230V power supply and connect compressed air to the reducer (timer) Set the working pressure with a knob , 2 .5 atm Photo no 3.
  • Page 5 Fig.1. The scheme to place the band with labels Place the roll with labels at the proper height with regards to the jar volume (height) ) • The label height is regulated with regards to the sensor by means of PMMA spacer plates •...

  • Page 6: Button Description

    2.4.3. Placing a new roll with labels In order to place a new roll, one must Loosen two screws fixing the label pressing • Remove the label press • Place a roll with labels and screw the press • Run a band with labels through the label guides •...

  • Page 7: Controller Setting

    Transfer to a panel that changes the value „jar delay” and „ roll delay” Approaching the label band in order to scroll it Swiching between the panels Used at the end of operations or when there is a longer break in usage. In order to change the settings, the labelling machine shall be stopped by means of a knob placed over the control panel.
  • Page 8 Once the ENTER button is pressed, the panel switches to the main panel. Photo no 10. Main panel II Photo no 11. Setting up the delays for a roll and an actuator Press the roll delay (photo) , a numerical table appears on the screen by means of which we select the required value, e.g.
  • Page 9 Photo no 13. Setting the roll delay II Actuator delay – this parameter is set when we see that pneumatic actuator (with two rolls – see photo) presses a jar too early or too late. By pressing the parameter “actuator delay” we select the required value and press ENTER.

  • Page 10: Cleaning And Maintenance

    7. Guarantee Products purchased from “Łysoń’ company are encompassed by the manufacturer’s guarantee. The guarantee duration equals 24 months A receipt or a VAT invoice is issued for each product purchased Details on the guarantee, see www.lyson.com.pl...

Table of Contents