Table of Contents
Related Manuals for Teka 97101
Summary of Contents for Teka 97101
- Page 1 Operating instructions (Translation of the original operating instructions) Extractor blower TEKA Absaug- und Entsorgungstechnologie GmbH, Millenkamp 9, D-48653 Coesfeld, Tel.: +49 2541-84841-0, E-Mail: info@teka.eu, www.teka.eu...
-
Page 2: Table Of Contents
Table of contents 1. General 2. Description of the system elements 2.1. Illustration of the system elements 2.2. Intended use 3. Safety instructions 3.1. Definition of the hazard symbols 3.2. General safety instructions 4. Storage, transport and installation of the device 5. -
Page 3: General
1. General Congratulations on purchasing the product from TEKA. Our engineers ensure that our devices reflect the state of the art through continuous development. Nevertheless, misuse or misconduct can endanger your safety. Please observe the following for a successful use of the device: Only authorised and instructed personnel can carry out transport, operation, maintenance and repair of the device. -
Page 4: Description Of The System Elements
2. Description of the system elements 2.1. Illustration of the system elements Installation example: 0,75 / 1,1 / 1,5 kW 2,2 / 3,0 kW Z.Nr. 13074704 / 00042601 Pos.1 Fan housing Pos.3 Suction nozzle Pos.2 Connection for mains cable Pos.4 Exhaust air nozzle Pos.5 Protective grid... -
Page 5: Safety Instructions
3. Safety instructions 3.1. Definition of the hazard symbols The device is constructed according to the state of the art and the recognised safety regulations. Nevertheless, during use threats to life and limb of the user or other persons may arise. The impairment of the machine or other property are also possible. -
Page 6: Storage, Transport And Installation Of The Device
4. Storage, transport and installation of the device WARNING Risk of injury from tilting or unmounted components when stored or transported. The device must be secured against tilting and slipping when it is stored or transported. Do not stand under or next to the floating load. Lift trucks, forklift trucks and transport cranes must have a sufficient minimum load bearing capacity. -
Page 7: Connecting The Suction Line And Exhaust Air Line
5.1. Connecting the suction line and exhaust air line For extracting the contaminated air, a suction line must be connected to the suction nozzle (see chapter 2.1). Depending on the application, the suction pipe must be equipped with extraction elements (suction arm, extraction hose, round duct grille, etc.). -
Page 8: Maintenance
6. Maintenance In accordance with national regulations, the operator is obliged to carry out repeat and functional tests. Unless otherwise specified by national regulations, we recommend regular visual inspections and functional tests of the device as described in the chapter “Maintenance intervals”. You find the chapter “Maintenance intervals”... -
Page 9: Diagnostics And Troubleshooting
A recommissioning of the device must only occur if it is ensured that the system is functionally equivalent to the original state. Repairs may only be carried out by TEKA personnel or, after consultation with TEKA GmbH, by the personnel authorised by the operator. -
Page 10: Technical Data
9. Technical data Supply voltage 230 / 400 / 500 Frequency Type of current 230 V = 1 400 + 500 V = 3 Engine power 0,75 Air flow volume max. m³/h 2000 2500 3000 3500 4000 Protection class IP54 ISO class Allowed ambient °C... -
Page 11: Ec Declaration Of Conformity
This declaration will become void if the device is exposed to modifications that are not approved by the manufacturer in written form. Authorized representative for the technical documentation: TEKA Absaug- und Entsorgungstechnologie GmbH, Millenkamp 9, D-48653 Coesfeld (Jürgen Kemper, managing director) Coesfeld, 3rd january 2020 BA_Sauggebläse_201013_EN... -
Page 12: Maintenance Intervals
11. Maintenance intervals 11.1. General maintenance The described maintenances are independent from the demands of the system operations. The operator is obliged to carry out repeated inspections and functional tests according to national regulations. If not otherwise covered by national regulations, the described maintenance intervals must be respected. -
Page 13: Electrical Test Of The Electrical Lines And Earthing Connections
11.1.2. Electrical test of the electrical lines and earthing connections WARNING Danger arising from electricity. The operator is responsible for ensuring that all work on electric components is carried out by authorised and qualified personnel. The device is subject to regular electrical checks by the operator of the device, and are subject to national standards of the different countries.
Need help?
Do you have a question about the 97101 and is the answer not in the manual?
Questions and answers