REMOTE WORLD MERLIN E945M Instructions

REMOTE WORLD MERLIN E945M Instructions

Advertisement

+
For use with Security 2.0 Garage Door Openers. The code between the
the remote control and the receiver changes with each use, randomly
accessing over a billion new codes. Refer to your product manual for the
location of the learn button.
NOTE: Your product may look
in this manual.
Single Button Remote Control
Model E940M
LED
3-Button Remote Control
Model E943M
LED

PROGRAM USING THE GARAGE DOOR OPENER

To prevent possible SERIOUS INJURY or DEATH from a moving gate or garage door:
ALWAYS keep remote controls out of reach of children. NEVER permit children to operate, or play with remote controls.
Activate gate or door ONLY when it can be seen clearly, is properly adjusted, and there are no obstructions to door travel.
ALWAYS keep gate or garage door in sight until completey closed. NEVER permit anyone to cross path of moving gate or door.
than the products illustrated
3- Button Mini Remote Control
LED
Model E945M
4-Button Remote Control
Model E950M
Press and hold the button on
the remote control or wireless
wall control you wish to use. The
Locate
the learn
button.
LED
LED
Wireless Wall Control
Wireless Wall Control
Model E138M
Model E128M
LED indicator on
the transmitter
continuously
(except E945M).
remoteworld.com.au
MERLIN E945M 3 BUTTON
REMOTE PROGRAMMING INSTRUCTIONS
ROLLER DOOR
OPENER
LEARN
BUTTON
LED
INDICATOR
Press and
immediately release
the Learn button.
SECTIONAL DOOR
OPENER
LED
INDICATOR
LEARN
BUTTON
4
The opener
or 2 clicks are
heard when
it has learnt
the code.

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the MERLIN E945M and is the answer not in the manual?

Questions and answers

Subscribe to Our Youtube Channel

Summary of Contents for REMOTE WORLD MERLIN E945M

  • Page 1 MERLIN E945M 3 BUTTON REMOTE PROGRAMMING INSTRUCTIONS For use with Security 2.0 Garage Door Openers. The code between the ROLLER DOOR SECTIONAL DOOR the remote control and the receiver changes with each use, randomly accessing over a billion new codes. Refer to your product manual for the...
  • Page 2 MERLIN E945M 3 BUTTON REMOTE PROGRAMMING INSTRUCTIONS CONT. TO ERASE ALL CODES FROM MEMORY When deactivating any unwanted remote control code, all previous codes will be Press and hold the Learn button on garage door opener erased. until the learn LED goes out (approximately 6 seconds).
  • Page 3 MERLIN E945M 3 BUTTON REMOTE PROGRAMMING INSTRUCTIONS CONT. REPLACING THE BATTERY The lithium battery should produce power for up to 5 years. If the battery is low, the remote control's LED will when the button is pressed. To replace battery: Replace cover.

Table of Contents